APU F42 sectional door

Name: APU F42 sectional door
Rating: 3.6 (8 reviews)

3.6(8 reviews)

Hörmann sectional door APU F42 – series 60 Aluminium extrusions, extensive glazing, with uniformly divided fields, bottom sections made of double-skinned, PU-foamed steel sections with S-ribbing. With Environmental Product Declaration (EPD*) acc. to ISO 14025 and prEN 15804 *ift Rosenheim EPD-STA-0.3.2 CE mark acc. to DIN EN 13241-1 Unfinished structural opening (width x height): 1200-8000 x 1875-7000 mm Application areas: Logistics, commercial halls, industrial halls, warehouses, workshops, collective garages

Özellikler

Performance characteristics: CE mark acc. to DIN EN 13241-1 Door leaf: Glazing frames made of aluminium extrusion profiles with steel end caps, bottom section made of double-skinned PU-foamed steel section, made of hot-galvanized sheet steel. Inner and outer finger trap protection. With bottom seal, intermediate seals and lintel seal made of EPDM, depth 42 mm. Glazing frames with clear synthetic double panes, 26 mm. Optionally further infills on request. Surface: Exterior and interior of glazing frames anodised in E6/C0 DIN 17611. Exterior and interior of bottom section polyester primer-coated, coil coating based on RAL 9002 Grey white. Exterior S-ribbed, Stucco-textured with horizontal ribbing with a spacing of 125 mm, interior Stucco-textured. Optionally glazing frames and bottom section in 10 preferred colours, RAL to choose, metallic colours, British Standard or NCS colours on request. Door guide: Angle frame with side trap guard, made of hot-galvanized sheet steel, horizontal safety tracks, side seal made of EPDM. Counterbalance via torsion springs, min. 25000 door cycles (standard). Optionally stronger torsion springs (more door cycles) on request. Door operation: Operator WA 400 with control A445. Optionally further model variants (operators/controls) on request. Fitting: Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door. Note: The floor in the area of the door opening must be horizontal across the entire door width. The exterior floor should be inclined away from the door directly in front of the door curtain. Application areas: Logistics, commercial halls, industrial halls, warehouses, workshops, collective garages

Teknik özellikler

Benzersiz ref.331
Ürün ailesiIndustrial doors
Ürün grubuSectional doors
Yayınlanma tarihi2021-01-01
Baskı numarası1
Yükseklik (mm)7000
Genişlik (mm)8000

Bağlantılar

Ürün URL’sihttps://architektenprogramm.hoermann.de/HAP/entry.php

İlgili

Ana malzemeAlüminyum
İkincil malzemePoliüretan
Tasarım yeriAlmanya
Üretim yeriAlmanya

Sınıflandırma

BIMobject kategorisiKapılar - Endüstriyel Kapılar
IFC sınıflandırmasıKapı
UNSPSC adıDoors
UNSPSC kodu301715
Uniclass 2015 koduPr_30_59_24_75
Uniclass 2015 açıklamasıSectional overhead doorsets
CSI MasterFormat 2014 kodu08 36 13
CSI MasterFormat 2014 başlığıSectional Doors
OmniClass numarası23-17 11 13
OmniClass başlığıMetal Doors
CSI UniFormat II koduB2030
CSI UniFormat II başlığıExterior Doors

Bölge bulunurluk durumu

Avrupa	Asya	Kuzey Amerika	Afrika	Güney Amerika	Okyanusya
Åland	Afganistan	Anguilla	Angola	Arjantin	Amerikan Samoası
Almanya	Azerbaycan	Antigua ve Barbuda	Batı Sahara	Bolivya	Avustralya
Andorra	Bahreyn	Aruba	Benin	Brezilya	Cook Adaları
Arnavutluk	Bangladeş	Bahamalar	Botswana	Ekvador	Fiji
Avusturya	Bhutan	Barbados	Burkina Faso	Falkland Adaları (Islas Malvinas)	Fransız Polinezyası
Belçika	Birleşik Arap Emirlikleri	Belize	Burundi	Fransız Guyanası	Guam
Beyaz Rusya	British Indian Ocean Territory	Bermuda	Çad	Guyana	Kiribati
Bosna Hersek	Brunei Sultanlığı	Birleşik Devletler	Cape Verde	Kolombiya	Kuzey Mariana Adaları
Bulgaristan	Christmas Adası	Caribbean Netherlands	Cezayir	Paraguay	Marshall Adaları
Cebelitarık	Çin	Cayman Adaları	Cibuti	Peru	Mikronezya Federal Devletleri
Çek Cumhuriyeti	Cocos Adaları	Curaçao	Comoros	Şili	Nauru
Danimarka	Endonezya	Dominik	Demokratik Kongo Cumhuriyeti	Surinam	New Caledonia
Estonya	Ermenistan	Dominik Cumhuriyeti	Ekvator Ginesi	Uruguay	Niue
Faroe Adaları	Filipinler	El Salvador	Eritre	Venezuela	Norfolk Adası
Finlandiya	Filistin	Grenada	Esvatini̇		Palau
Fransa	Güney Kore	Grönland	Etiyopya		Papua Yeni Gine
Guernsey	Gürcistan	Guadeloupe	Fas		Pitcairn Adaları
Hırvatistan	Hindistan	Guatemala	Fildişi Sahili		Samoa
Hollanda	Hong Kong	Haiti	Gabon		Solomon Adaları
İngiltere	Irak	Honduras	Gambiya		Timor-Leste
İrlanda	İran	İngiliz Virjin Adaları	Gana		Tokelau
Isle of Man	İsrail	Jamaika	Gine		Tonga
İspanya	Japonya	Kanada	Guinea-Bissau		Tuvalu
İsveç	Kamboçya	Kostarika	Güney Afrika		United States Minor Outlying Islands
İsviçre	Katar	Küba	Güney Sudan		Vanuatu
İtalya	Kazakistan	Martinique	Kamerun		Wallis ve Futuna
İzlanda	Kırgızistan	Meksika	Kenya		Yeni Zelanda
Jersey	Kuveyt	Montserrat	Kongo
Karadağ	Kuzey Kore	Nikaragua	Lesotho
Kıbrıs	Laos	Panama	Liberya
Kuzey Makedonya	Lübnan	Porto Riko	Libya
Letonya	Macau	Saint Barthélemy	Madagaskar
Liechtenstein	Maldivler	Saint Kitts ve Nevis	Malavi
Litvanya	Malezya	Saint Lucia	Mali
Lüksemburg	Moğolistan	Saint Martin	Mauritius
Macaristan	Myanmar (Burma)	Saint Pierre ve Miquelon	Mayotte
Malta	Nepal	Saint Vincent ve Grenadines	Mısır
Moldova	Özbekistan	Sint Maarten	Moritanya
Monako	Pakistan	Trinidad ve Tobago	Mozambik
Norveç	Singapur	Turks ve Caicos Adaları	Namibya
Polonya	Sri Lanka	Virjin Adaları	Nijer
Portekiz	Suriye		Nijerya
Romanya	Suudi Arabistan		Orta Afrika Cumhuriyeti
Rusya	Tacikistan		Reunion
San Marino	Tayland		Ruanda
Sırbistan	Tayvan		Saint Helena
Slovakya	Türkiye		São Tomé ve Príncipe
Slovenya	Türkmenistan		Senegal
Svalbard	Umman		Seychelles
Ukrayna	Ürdün		Sierra Leone
Vatikan	Vietnam		Somali
Yunanistan	Yemen		Sudan
			Tanzanya
			Togo
			Tunus
			Uganda
			Zambiya
			Zimbabwe