iQ251D Deionized Commercial Tankless System for Industrial Applications

iQ251D Deionized Commercial Tankless System for Industrial Applications

Commercial Tankless on-demand water heater

KEY FEATURES

•   Industrial Grade - designed for deionized, RO water
•   Robust 316L stainless steel commercial grade heat exchanger, withstands highly corrosive deionized water
•   Flexible heat exchanger built to accommodate quick temperature changes and continual ON-OFF cycles with minimal stress
•   High power (73kW) in a small package vs. electric water heaters. No need for 440V or larger amperage
•   ASME-HLW Compliant
•   Industry best 10-year commercial HX warranty
•   3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear
•   Wi-Fi Connectivity

PERFORMANCE
• Turndown Ratio of 8.3:1 per unit.
• Cascade up to 10 units with common venting for a total of over 2500MBH and a 83:1 total turndown ratio

Opis

Type Indoor/Outdoor, Wall Hung, Fully Condensing, Commercial, Tankless On-Demand Water Heater
Fuel Preset for NG / LP convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 251,000
Maximum Output (BTU/hr) 240,960
Thermal Efficiency 96%
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 90 LBS
Water Inlet / Outlet Connection 3/4” NPT, Stainless 316L
Gas Inlet Connection 3/4” NPT
Minimum Flow Rate for Activation 0.6 GPM
Ignition Electronic Spark Ignition
Venting Type Direct Vent (2 pipe – intake & exhaust), Power Vent (1 pipe – exhaust only)
Venting Materials Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel (AL29-4C)
Max 3” Vent Length – Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length – Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Common Venting Yes
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature
Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual Flame Sensing, Flue Damper
Water Pressure Min / Max (PSI) 30 / 160
NG/LP – Minimum Static Gas Pressure 1/2”
(non-corrugated, black iron)
6”
NG/LP – Minimum Static Gas Pressure 3/4”
(non-corrugated, black iron)
2.5”
NG/LP – Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Specyfikacja techniczna

Nr referencyjnyiQ251D
Rodzina produktuDeionized
Grupa produktuCommercial Tankless System - Wall Hung
TypObiekt (jeden obiekt)
Data publikacji2020-05-11
Numer edycji1

Linki

Url produktuhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/deionized/iq251d-iq-series/
Instrukcja montażuhttps://intellihot.com/resources/downloads/gen-ii/profile/iq251d-gen-ii
Certyfikacja produktuhttps://intellihot.com/resources/downloads/gen-ii/profile/iq251d-gen-ii
Opis technicznyhttps://intellihot.com/resources/downloads/gen-ii/profile/iq251d-gen-ii

Dodatkowe informacje

Materiał głównyStal
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHVAC - Podgrzewacze wody
Klasyfikacja IFCWymiennik ciepła
Kod ETIMEC000392
Nazwa ETIMInstantaneous water heater
UNSPSC nameCommercial water heaters
UNSPSC code40101826
Uniclass 2015 CodePr_60_60_96
Uniclass 2015 DescriptionWater heaters
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-31 29 11
OmniClass TitleInstantaneous Hot Water Heaters
CSI UniFormat II CodeD3090
CSI UniFormat II TitleOther HVAC Systems & Equipment

Dostępny w krajach:

Ameryka północna	Ameryka Południowa
Anguilla	Gujana
Antigua i Barbuda	Surinam
Aruba
Bahamy
Barbados
Belize
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Gwadelupa
Haiti
Holandia Karaibska
Jamajka
Kajmany
Kanada
Kuba
Martynika
Montserrat
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wyspy Dziewicze