i200 Commercial Tankless System - Wall Hung

i200 Commercial Tankless System - Wall Hung

On-Demand Commercial Tankless Water Heater

KEY FEATURES

• Stainless (316L) Heat Exchanger

• Flexible-Floating Design, stress-relieving and thermal
shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"-
14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data,
troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Opis

Type Indoor/Outdoor, Wall-Hung, Commercial, Tankless, Fully Condensing, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 199,950
Thermal Efficiency 94% 92%
Energy Factor 0.93 N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Venting Materials Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel (AL29-4C)
Max 3” Vent Length - Single Pipe / Power Vent 200 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 100 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent
(2” not allowed at elevations above 4,000 ft)
26 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Two Pipe / Direct Vent
(2” not allowed at elevations above 4,000 ft)
21 ft, deduct 5 ft per 90° elbow
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)
FEATURES

Specyfikacja techniczna

Nr referencyjnyi200
Rodzina produktui Series
Grupa produktuCommercial Tankless System - Wall Hung
TypObiekt (jeden obiekt)
Data publikacji2020-05-11
Numer edycji1

Linki

Url produktuhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i200-i-series/
Instrukcja montażuhttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Certyfikacja produktuhttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Opis technicznyhttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii

Dodatkowe informacje

Materiał głównyStal
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHVAC - Podgrzewacze wody
Klasyfikacja IFCWymiennik ciepła
Kod ETIMEC000392
Nazwa ETIMInstantaneous water heater
UNSPSC nameCommercial water heaters
UNSPSC code40101826
Uniclass 2015 CodePr_60_60_96
Uniclass 2015 DescriptionWater heaters
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-31 29 11
OmniClass TitleInstantaneous Hot Water Heaters
CSI UniFormat II CodeD3090
CSI UniFormat II TitleOther HVAC Systems & Equipment

Dostępny w krajach:

Ameryka północna	Ameryka Południowa
Anguilla	Gujana
Antigua i Barbuda	Surinam
Aruba
Bahamy
Barbados
Belize
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Gwadelupa
Haiti
Holandia Karaibska
Jamajka
Kajmany
Kanada
Kuba
Martynika
Montserrat
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wyspy Dziewicze