VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Spesifikasjon

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Tekniske spesifikasjoner

Unik ref.VS-65-150-M
ProduktfamilieCirculators
ProduktgruppeWet Rotor Electronic Circulators
TypeObjekt (enkelt objekt)
Utgivelsesdato2019-08-19
Utgavenummer1

Lenker

Produktets nettadressehttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Monteringsanvisninghttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Teknisk beskrivelsehttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Relatert

HovedmaterialeBronze
Sekundært materialePlastikk
Designet iItalia
Produsert iItalia

Klassifisering

BIMobject kategoriRørsystem - Pumper
UNSPSC-navnCirculating pumps
UNSPSC-kode40151504
CSI MasterFormat 2014 kode22 35 23
CSI MasterFormat 2014 tittelCirculating, Domestic Water Heat Exchangers

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten