EVOSTA 2/SAN

APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION FEATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Spesifikasjon

TECHNICAL DATA Operating range: 0,4-3,6 m3/h with head up to 6,9 metres. Pumped liquid temperature range: from -10 °C to +110°C Working pressure: 10 bar (1000 kPa) Protection class: IPX5 Insulation class: F Installation: with horizontal motor axis Standard power input:: single-phase 1x230 V~ 50/60 Hz Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).

Tekniske spesifikasjoner

Unik ref.EVOSTA-2-SAN
ProduktfamilieCirculators
ProduktgruppeWet Rotor Electronic Circulators
TypeObjekt (enkelt objekt)
Utgivelsesdato2018-03-11
Utgavenummer1

Lenker

Produktets nettadressehttps://www.dabpumps.com/en/products/circulators/wet-rotor-electronic-circulators/evosta-2
Monteringsanvisninghttps://dabpumps.com/sites/default/files/qrcode_pdf/60187640_EVOSTA2-3-2SOL.pdf
Teknisk beskrivelsehttps://www.dabpumps.com/sites/default/files/document/60187311_NEW%20EVOSTA%202-3_TS_ENG.pdf

Relatert

HovedmaterialeCast iron
Sekundært materialePlastikk
Designet iItalia
Produsert iItalia

Klassifisering

BIMobject kategoriRørsystem - Pumper
IFC-klassifiseringrørtilpasning
ETIM-kodeEC010980
ETIM-navnBuilt-in circulation pump
UNSPSC-navnCirculating pumps
UNSPSC-kode40151504
Uniclass 2015 kodePr_65_53
Uniclass 2015 beskrivelsePump products
CSI MasterFormat 2014 kode22 35 23
CSI MasterFormat 2014 tittelCirculating, Domestic Water Heat Exchangers
OmniClass-nummer23-27 17 00
OmniClass-tittelPumps
CSI UniFormat II kodeD2020
CSI UniFormat II tittelDomestic Water Distribution

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten