iN199 Neuron Slim Design Commercial Tankless System

The NEW iN199 Neuron

The latest addition to the Neuron line was specifically designed to be drop-in ready for all tankless water heaters using Natural Gas or Propane that utilize a 120-gallon tank. Intellihot's iN199 will save commercial properties up to 40% per year on their energy bills and reduce greenhouse gas emissions by 40%. The iN199 is the perfect tankless solution for commercial properties that want reliable hot water at an affordable price with no tank to maintain.

System installation is faster, easier, and less expensive than traditional tank-type water heaters.

iN199 Features:

199,950 BTU/hr.
Flexible-Floating Design, stress-relieving and thermal shock resistant
Multi-Unit - Masterless cascading with common venting
Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
7" Color Touch Screen - access to real-time critical data, troubleshooting, parts wear and more
Direct Cell-LTE Connectivity (Monitored 24/7 for FREE for 2 Years)
Designed and Built in the U.S.
Quick ship from our factory to your warehouse or job site!
Weight: 266lbs.

Additional Features

Gas Pressure Sensor – Address site gas installation issues

Water Pressure Sensor – Eliminate pump startup failures

Pump controlled by Control Board – Automatic pump control

Control Board OTA – With software backup

Intelligent Series touchscreen Display – Increased memory for screens

Smart Faults/Alerts – The software will identify the most likely cause

Voce di capitolato

Type: Indoor, Floor Mounted, On-Demand Water Heater
Fuel: Preset for NG / LP convertible without additional parts
Minimum Input (BTU/hr): 30,000
Maximum Input (BTU/hr): 199,950
Maximum Output (BTU/hr): 191,950
Thermal Efficiency: 96%
Turn Down Ratio (TDR): 7:1
Water Inlet / Outlet Connections: 1-1/2” NPT
Gas Inlet Connection: 3/4” NPT
Condensate Drain Connection: 3/4” NPT panel mount
Maximum Condensate Flow Rate (GPH): 3.6
Unit Dimensions H X W X D (Inches): 67.5 X 20 X 20 (15 CU. FT)
Service Clearances: 4" on the back, 6” on the top, 21" on the front, and 6” on the sides
Unit Weight (LBS): 266 LBS
Shipping Crate Dimensions H X W X D / Weight: 85 X 29.5 X 27 (Inches) / 366 (LBS)
Venting Type: Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only, room air)
Venting Materials (USA): Sch. 40 PVC, Sch. 80 CPVC, Polypropylene, Stainless Steel
Venting Materials (Canada): Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL 29-4C SS)
Vent Size (Diameter): 3” Ø
Max Vent Length - Single Pipe / Power Vent*: 195 FT
Max Vent Length - Two Pipe / Direct Vent*: 95 FT
* Venting Note: From the maximum lengths above, deduct 5 ft. per 90° elbow and 2 ft. per 45° elbow
Ignition: Electronic Spark Ignition
Temperature Range: 100°F – 190°F
Temperature Stability: +/- 4°F (During Demand)
Installation Location Ambient Temperature: 40°F – 130°F
Safety: Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked Vent Detector, Dual Flame Sensing
Water Pressure Min / Max (PSIG): 30 / 160
NG/LP - Min. Dynamic Gas Pressure (Full Fire): 2.5” WC (set Gas regulator to 8” WC for NG 11” WC for LP)
NG/LP - Maximum Static Gas Pressure: 14” WC (set Gas regulator to 8” WC for NG 11” WC for LP)
Gas Regulator Pressure Set To: 8” WC for NG, 11” WC for LP
Electrical: 120V AC, 60 Hz
Power Consumption: Max 9 Amps, 10W (Standby)
Internal Water Volume (gallons): 1

Specifiche tecniche

Rif. UnicoiN199
Famiglia di prodottoNeuron
Gruppo di famigliaCommercial Tankless System - Free Standing Slim Design
TipoOggetto (oggetto singolo)
Data di pubblicazione2021-12-14
Numero di versione1

Links

Link al Prodottohttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/neuron/in-199-neuron/
Istruzioni di installazionehttps://intellihot.com/intellihot-product-technical-downloads/
Certificazione di Prodottohttps://intellihot.com/intellihot-product-technical-downloads/
Descrizione Tecnicahttps://intellihot.com/intellihot-product-technical-downloads/

Relativo a

Materiale principaleAcciaio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
Clasificazione IFCScambiatore di calore
Codice ETIMEC000392
Nome ETIMInstantaneous water heater
Nome UNSPSCCommercial water heaters
Codice UNSPSC40101826
Codice Uniclass 2015Pr_60_60_96
Descrizione Uniclass 2015Water heaters
Codice CSI MasterFormat 201423 00 00
Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
Numero OmniClass23-31 29 11
Titolo OmniClassInstantaneous Hot Water Heaters
Codice CSI UniFormat IID3090
Titolo CSI UniFormat IIOther HVAC Systems & Equipment

Disponibilità Regionale

Nord America	Sud America
Anguilla	Guyana
Antigua e Barbuda	Suriname
Aruba
Bahamas
Barbados
Belize
Canada
Cuba
Curaçao
Dominica
Giamaica
Grenada
Guadalupa
Haiti
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Montserrat
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago