Pubblica i tuoi prodotti
iQ2001 Floor Standing Commercial Tankless System
iQ2001 Floor Standing Commercial Tankless System
iQ2001 Floor Standing Commercial Tankless System
iQ2001 Floor Standing Commercial Tankless System
iQ2001 Floor Standing Commercial Tankless System
iQ2001 Floor Standing Commercial Tankless System

    iQ2001 Floor Standing Commercial Tankless System

    Commercial Tankless on-demand water heater

    KEY FEATURES

    • Multiple Stainless (316L) Heat Exchangers
    • Flexible-Floating Design, stress-relieving and thermal shock resistant
    • Built-in Redundancy - Multiple heat engines with individual controls
    • Multi-Unit - Masterless cascading with common venting
    • Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
    • ASME-HLW Compliant
    • Designed and Built in the U.S.
    • 7" Color Touch Screen - access to usage data, troubleshooting, and parts wear
    • Wi-Fi Connectivity

    PERFORMANCE

    • Turndown Ratio of 66:1 per unit
    • Cascade up to 3 units with common venting for a total of over 6,000MBH and a 200:1 total turndown ratio

    Voce di capitolato
    • Type Indoor/Outdoor, Commercial, Floor Mounted, Tankless, Condensing, Fully Modulating, On-Demand Water Heater

      Fuel Preset for NG / LP convertible
      Minimum Input (BTU/hr) 30,000
      Maximum Input (BTU/hr) 1,999,999
      Maximum Output (BTU/hr) 1,860,000
      Thermal Efficiency 93%
      Turn Down Ratio (TDR) 66:1
      Water Inlet / Outlet Connections 3” Headers with 7.5” OD Flange
      Gas Inlet Connection 2” Gas Inlet With 6” OD Flange
      Condensate Drain Connection 3/4” Flex PVC
      Maximum Condensate Flow Rate (GPH) 14.4
      Dimensions H X W X D (Inches) 67.7 X 30 X 60.4 (66 CU. FT)
      Service Clearances Recommend 24” on all sides, 32” in the front
      Weight (LBS) 1225 LBS
      Venting Type Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only)
      Venting Materials (USA) Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel (AL29-4C)
      Venting Materials (Canada) Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL 29-4C SS)
      Vent Size (Diameter) 8” Ø
      Max Vent Length - Single Pipe / Power Vent* 155 ft (8”)
      Max Vent Length - Two Pipe / Direct Vent* 75 ft (8”)
      * Venting Note: From the maximum lengths above, deduct 5 ft. per 90° elbow and 2 ft. per 45° elbow
      Ignition Electronic Spark Ignition
      Temperature Range 100°F – 190°F
      Temperature Stability +/- 4°F
      Installation Location Ambient Temperature 40°F – 130°F
      Safety
      Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor,
      Blocked Vent Detector, Dual Flame Sensing
      Water Pressure Min / Max (PSIG) 30 / 160
      Pressure Relief Valve (Select BTU/hr Input Rating to Match Model Max Input) 1”
      NG/LP - Min. Dynamic Gas Pressure (Full Fire) 2.5”
      NG/LP - Maximum Static Gas Pressure 14”
      Gas Pressure for Adjustments 8” for NG, 11” for LP
      Electrical (2) 120V AC, 60 Hz
      Power Consumption (2) Max 20 Amps
      Internal Water Volume (gallons) 8

    Specifiche tecniche
    • Rif. UnicoiQ2001
    • Famiglia di prodottoiQ Series
    • Gruppo di famigliaCommercial Tankless System - Free Standing
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2020-05-11
    • Numero di versione1
    Relativo a
    • Materiale principaleAcciaio
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    Classificazioni
    • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
    • Clasificazione IFCScambiatore di calore
    • Codice ETIMEC000392
    • Nome ETIMInstantaneous water heater
    • Nome UNSPSCCommercial water heaters
    • Codice UNSPSC40101826
    • Codice Uniclass 2015Pr_60_60_96
    • Descrizione Uniclass 2015Water heaters
    • Codice CSI MasterFormat 201423 00 00
    • Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
    • Numero OmniClass23-31 29 11
    • Titolo OmniClassInstantaneous Hot Water Heaters
    • Codice CSI UniFormat IID3090
    • Titolo CSI UniFormat IIOther HVAC Systems & Equipment

    Disponibilità Regionale

    Nord America Sud America
    Anguilla
    Guyana
    Antigua e Barbuda
    Suriname
    Aruba
    Bahamas
    Barbados
    Belize
    Canada
    Cuba
    Curaçao
    Dominica
    Giamaica
    Grenada
    Guadalupa
    Haiti
    Isole BES
    Isole Cayman
    Isole Turks e Caicos
    Isole Vergini Americane
    Isole Vergini britanniche
    Martinica
    Montserrat
    Porto Rico
    Repubblica Dominicana
    Saint Kitts e Nevis
    Saint Martin
    Saint Vincent e Grenadine
    Saint-Barthélemy
    Santa Lucia
    Sint Maarten
    Stati Uniti
    Trinidad e Tobago