发布您的产品
Protan BlueProof Green water attenuation system on concrete substrate
Protan BlueProof Green water attenuation system on concrete substrate
Protan BlueProof Green water attenuation system on concrete substrate
Protan BlueProof Green water attenuation system on concrete substrate
    PROTAN

    Protan BlueProof Green water attenuation system on concrete substrate

    PROTAN BLUEPROOF GREEN WATER ATTENUATION SYSTEM ON CONCRETE SUBSTRATE

    Protan BlueProof is a new and SINTEF-approved (TG 20541) water attenuation system for new and existing roofs (also known as a blue roof). Protan BlueProof Green expands the function of the roof and helps prevent floods and water damage.

    With this system, water is gradually drained and allowed into the storm drain network, avoiding overloading resulting in floods. The system not only solves current problems with storm floods, but also those of the future. Protan can calculate the predicted volumes of water for roofs in specific locations during storm events. Water loads can then be taken into account at an early stage during the building’s construction, ensuring the roof’s structure can retain the calculated water.
    This is often cheaper than utilising other methods of water attenuation.

    Protan BlueProof combines a trusted waterproofing system and a water attenuation system in one. Thus keeping a building’s contents secure whilst reducing the effects of flooding on the surrounding environment.

    Water attenuation calculations are carried out by Protan and are based on the project's location, local authority requirements and the roof's design. Roof slopes can be reduced to 1:100 fall to provide the optimum water attenuation as well as a lower roof profile.

    Protan BlueProof Green system takes the concept a step further by allowing the roof to be utilised further, whether this is a extensive green roof or a roof terrace for recreational use. A void beneath the protection layer allows for a water magazine to build up in the event of a storm.

    Quality assurance of installation
    A Protan BlueProof Roofing System shall always be calculated and planned in detail by Protan AS. The roofing system must be installed by roofing contractors specially approved by Protan AS. Their roofers must have passed "Roofing school" (a certificate containing the relevant basic education in Protan's roofing handbook) and attended Protan BlueProof roofing training.

    All roofs must be undertaken visual inspection done by a person especially appointed by Protan. During the inspection focus shall lie on good melt out along all welding joints on the roof area as well as around details and endings.

    After completing the roof installation, a water flood / pressure test of the roof area has to be carried out, alternatively, verification using electronic leak testing.

    Maintenance
    For Protan BlueProof annual inspection is required to be in front of possible damages. All Protan BlueProof roofs require a maintenance agreement with the building owner. This will ensure qualified inspection and maintenance of the roof and its components up to two times a year during the roofs lifetime.

    CONSTRUCTION STRUCTURE:

    • TERRACE / EXTENSIVE GREEN / SEDUM ROOF LAYERS
    • PROTAN BLUECELL WATER DRAINAGE LAYER
    • PROTECTION MEMBRANE
    • PROTAN BP GREEN
    • PROTAN APPROVED FASTENERS (IF REQUIRED)
    • CONDUCTIVE FELT LAYER
    • INSULATION
    • VAPOUR CONTROL LAYER
    • CONCRETE SUBSTRATE

    PROTAN BP MEMBRANE:

    • Protan BP Green is ca. 1.8 mm thick roofing membrane made of pliable PVC with a core of extra strong polyester reinforcement, which is used in Protan BlueProof Green Roofing System. 
    • Protan BP Green can be used as roofing on different kinds of substrate, but needs a separate glass migration barrier of the quality 120 g/m2 on polystyrene substrates. 
    • Protan BP Green has additional stabilizers to make the membrane resistant to high and low temperatures, ultra violet radiation and atmospheric contamination and to improve safety in case of fire. 
    • Welding of joints is carried out by using hot air. The roofing membranes have an embossed surface that provides an anti-slip texture.

     SYSTEM INSTALLATION METHOD:

    • Protan Standard Overlap System - The membrane is fastened to the substrate along the longitudinal sheet edges and overlapped by the adjoining roll. The two rolls are welded together using hot air.
    • Protan Prefabricated Sheets system is the best and fastest solution in wind-exposed areas, so it is ideal when the roof has to be covered quickly. The membrane is provided in 2 or 4 metre widths with high strength strips welded longitudinally on the underside for mechanical fastening.
    • The Protan Secret Fix System uses a membrane in 2-metre widths with extra strong strips welded transversely to the underside for mechanical fastening.

    Please contact Protan for further advice.

    FASTENERS:

    • Protan approved - must be calculated according to EN 1991-1-4 alongside national annexes and local regulations.

    INSULATION:

    Various types of insulation can be used in combination with Protan membranes and can be flat insulation or sloped insulation. The material type and design will depend on the building design, fire classification and local regulation requirements.

    • Mineral wool (MW) – can be glass or stone type
    • Polyisocyanurate (PIR) - foil faced
    • Combination EPS-MW

    VAPOUR CONTROL LAYER:

    • Polyethylene
    • Bitumen

    CONCRETE SUBSTRATE:

    • Structural concrete as either precast elements or reinforced cast in-situ.
    规格
    • TECHNICAL SPECIFICATION

      Protan BP Green specifications are subject to availability and may not be available or approved in all countries/regions.

      Membrane thickness:

      • ca.1.8 mm (2,1 kg/m2)

      Membrane standard widths: 

      • 1.0 m
      • 2.0 m

      Membrane standard roll lengths: 

      • Made to measure

      Membrane colours (nearest RAL code):

      • Dark grey F94 - RAL 7012 

      FIRE CLASSIFICATION

      Protan BlueProof Green roof systems are classified according to EN 13501-5. Fire classifications are available on a variety of constructions and insulation types. Please contact Protan for further information or refer to the relevant technical approvals.

    技术规格
    • 唯一参考blueproof_green_concrete_eu
    • 产品系列Roofing
    • 产品组Single Ply Membrane
    • 类型对象(单个对象)
    • 发布日期2021-07-20
    • 版本号1
    相关
    • 主材料PVC
    • 设计国家/地区挪威
    • 制造国家/地区挪威
    分类
    • BIMobject 类别建筑材料 - Waterproofing & Membranes
    • IFC 分类屋顶
    • UNSPSC 名称Roofing membranes
    • UNSPSC 代码30151505
    • Uniclass 2015 代码Ss_30_40_30_80
    • Uniclass 2015 说明Single layer sheet warm roof covering systems
    • CSI MasterFormat 2014 代码07 50 00
    • CSI MasterFormat 2014 标题Membrane Roofing
    • OmniClass 编号23-13 39 31 11 27
    • OmniClass 标题Polyvinyl chloride (PVC) Single Layer Roof Membranes
    • CSI UniFormat II 代码B3010
    • CSI UniFormat II 标题Roof Coverings

    发售地区

    欧洲 亚洲
    丹麦
    土耳其
    乌克兰
    俄罗斯
    保加利亚
    克罗地亚
    冰岛
    列支敦士登
    匈牙利
    北马其顿
    卢森堡
    圣马力诺
    塞尔维亚
    塞浦路斯
    奥兰
    奥地利
    安道尔
    希腊
    德国
    意大利
    拉脱维亚
    挪威
    捷克共和国
    摩尔多瓦
    摩纳哥
    斯洛伐克
    斯洛文尼亚
    斯瓦尔巴特群岛
    格恩西岛
    梵蒂冈
    比利时
    法国
    法罗群岛
    波兰
    波斯尼亚 黑塞哥维那
    泽西岛
    爱尔兰
    爱沙尼亚
    瑞典
    瑞士
    白俄罗斯
    直布罗陀
    立陶宛
    罗马尼亚
    芬兰
    英国
    荷兰
    葡萄牙
    西班牙
    阿尔巴尼亚
    马恩岛
    马耳他
    黑山