发布您的产品
PAC-150 180° Double Lock metal roof panel

PAC-150 180° Double Lock metal roof panel

PAC-150 standing seam metal roofing panels combine semi-structural metal panel performance with architectural roofing panel aesthetics. PAC-150 roofing coil for field-forming operations is leveled to provide superior panel flatness. Maximum panel length is limited when factory or shop-formed but virtually unlimited when field-formed; minimum panel length is approximately 4’.

PAC-150 roofing panels feature a 1.5” leg height which requires mechanical field seaming to either 90° or 180° depending on the project’s uplift requirements. Panels have a concealed-fastener clip designed to allow for maximum design flexibility. For further details, please contact a Petersen rep.

This panel combines an attractive thin-rib profile with superior structural performance. PAC-150 panels are designed for application over a wide variety of substrates in slopes as low as 1/2:12 pitch. PAC-150 roofing panels are available in a wide variety of widths from 12” to 20”. Materials available include 22 and 24 gauge steel plus .032 and .040 aluminum.

Regional Availability
PAC-150 is produced only in Georgia, Maryland and Arizona facilities; additional freight charges might apply.

Curved Applications
The PAC-150 panels can be curved to a minimum radius of 10’. Curving can be done in the field or at the factory depending on the radius and length of the panel. For details about curving capabilities, please contact the Acworth, Ga., or Annapolis Junction, Md., factories.

Seamers
PAC-150 panels require the use of mechanical seamers. When seaming panels on slopes greater than 6:12, caution must be exercised to prevent seamer slippage and resulting finish scratches that may void the warranty. Seamers are available along with hand crimpers and other tools through D.I. Roof Seamers, which is the only supplier of this equipment approved by Petersen Aluminum.

规格
  • Features

    • 30 year non-prorated finish warranty
    • Available in four pan variations; smooth, striated, pencil rib or flat rib. Check locally for panel condition availability
    • Maximum panel length of 64’ when factory or shop-formed but virtually unlimited when field-formed
    • Mechanically seamed in the field to 180°
技术规格
  • 唯一参考panel-pac-clad-pac-150-180
  • 产品系列Roof Panels
  • 产品组Roof Panels
  • 类型对象(单个对象)
  • 发布日期2020-06-16
  • 版本号1
  • 深度 (inch)1.5
相关
  • 设计国家/地区美国
  • 制造国家/地区美国
分类
  • BIMobject 类别建筑 - 屋顶
  • IFC 分类屋顶
  • UNSPSC 名称Roofing materials
  • UNSPSC 代码301515
  • Uniclass 2015 代码Pr_25_93_72
  • Uniclass 2015 说明Roofing and cladding units
  • CSI MasterFormat 2014 代码07 40 00
  • CSI MasterFormat 2014 标题Roofing and Siding Panels
  • OmniClass 编号23-13 39 27
  • OmniClass 标题Roof Cladding

发售地区

北美
美国