Intono 1 - Outside Lighting

wall mounted for outdoor applications, single beam / double beam

surface mounted (wall)
Power: 3W (Intono 1.1), 6W (Intono 1.2)
Power supply: 24Vdc
Lumen output at source: 168 lm (3000K, CRI 80), 147 lm (3000K, CRI 90) per beam
Delivered lumen output: 146 lm (3000K, 22°, CRI 80), 128 lm (3000K, 22°, CRI 90) per beam
Intono 1.1:1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
Intono 1.2: 2 power LEDs, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: Intono 1.1: 13°, 22°, 33°: optical system consisting of a high-efficiency TIR lens. intono 1.2: 13°+13°, 13°+33°, 22°+22°, 33°+33°: double-beam optical system consisting of a high-efficiency TIR lens
CRI: 80, 90
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion
Finishes: cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 3-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with a RAL 9005 black serigraphed border
Installation: the symmetric mounting bracket means the device can be installed without any restrictions on orientation between the bracket and the body of the device
power supply unit not included
Ingress protection: IP65
Impact resistance: IK04
version compatible with Google Home or Amazon Echo available on request for voice command control
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: 170 g
Dimensions: 46x30x90 mm
Energy efficiency class: A / A+ / A++
Accessories: honeycomb louvre
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption