发布您的产品
Macuk E S-SR PRO
Lovato

Macuk E S-SR PRO

MACUK E S-SR PRO is an electronic Heat Interface Unit for heating and hot water applications. Thanks to the two plate heat exchanger the module also allows complete separation from the primary circuit or central plant system. Suitable for apartments, terraced houses, semi-detached house with centralized heating system.The production of domestic hot water is electronically controlled by a control unit and a brazed stainless steel plate heat exchanger that allows an immediate supply of DHW. Thanks to the modulating valve with 5-seconds stepper motor actuator (installed in the primary return circuit), which partializes the water flw in the primary circuit, water waste and unnecessary waiting times are eliminated. The primary water flw rate is also proportionally managed by the module: according to the demand of the sanitary user, the valve increases or decreases the opening of the primary return circuit. All the energy not used in the DHW circuit is used in the heating circuit.The module includes a built-in by-pass function, directly controlled by the electronics and the modulating valve and depends to the temperature set on the DHW sensor. During the stand-by phase, the DHW comfort function is activated, keeping the temperature of the exchanger at the set point value. If the temperature falls below the set temperature – hysteresis temperature (Tset-T hys) the two-way valve of the module is activated, taking heat from the primary circuit.The electronic control can also manage 2 temperature levels in the heating circuit: for underfloor heating ystems and for radiator/fan coil systems, both can be set by compensation curves.The pump will change the speed according to the ∆T value between flw and return. There is also a pressure transducer to protect the pump from damage caused by overpressures.
规格
  • Heat interface unit module consisting of: primary circuit with Cu Ø 18 mm pipes kit, 400 µ primary circuit strainer, sensor pocket for heat meter flow sensor, brazed AISI 316L heat exchanger for space heating circuit (separately supplied), 2-way valve DN20 Kv=4.5 regulated by means of 230V 3p electric servomotor, template for thermal energy meter L110 mm with M ¾" connections. 2-way modulating valve with linear stepper motor actuator 12V to regulate DHW production by partializing the water flow rate in the primary circuit, predisposition for brazed plate heat exchanger in AISI 316L on DHW side (supplied separately) sensor pocket for DHW circuit sensor and flow switch with calibration 1.5 ÷ 35 l/min, Cu piping kit Ø 18 mm. L110 mm jig with M ¾" connections for domestic cold water meter with 1,5 mc/h impulsive output (supplied separately). Heating circuit Cu pipe kit Ø 18 mm, thermowell for system flow probe, pressure transducer, high efficiency electronic circulator Wilo PARA 15/1-6 iPWM) and 3 bar safety valve. Mehta digital controller for electronic control of DHW production and complete management of the heating circuit. Manual air vent valves and system load tap included.
技术规格
  • 唯一参考Macuk-E-S-SR-PRO
  • 产品系列Macuk
  • 产品组Pro
  • 发布日期2021-01-21
  • 版本号1
相关
  • 设计国家/地区意大利
分类
  • BIMobject 类别暖通空调 - 暖通空调

发售地区

欧洲 亚洲 南美洲 大洋洲 非洲
丹麦
中国
乌拉圭
新西兰
南非
乌克兰
亚美尼亚
巴西
澳大利亚
摩洛哥
俄罗斯
吉尔吉斯斯坦
阿根廷
突尼斯
保加利亚
哈萨克斯坦
阿尔及利亚
克罗地亚
土耳其
冰岛
大韓
列支敦士登
巴林
匈牙利
朝鲜
北马其顿
格鲁吉亚
卢森堡
沙特阿拉伯
圣马力诺
阿塞拜疆
塞尔维亚
阿拉伯联合酋长国
塞浦路斯
黎巴嫩
奥兰
奥地利
安道尔
希腊
德国
意大利
拉脱维亚
挪威
捷克共和国
摩尔多瓦
摩纳哥
斯洛伐克
斯洛文尼亚
斯瓦尔巴特群岛
格恩西岛
梵蒂冈
比利时
法国
法罗群岛
波兰
波斯尼亚 黑塞哥维那
泽西岛
爱尔兰
爱沙尼亚
瑞典
瑞士
白俄罗斯
直布罗陀
立陶宛
罗马尼亚
芬兰
英国
荷兰
葡萄牙
西班牙
阿尔巴尼亚
马恩岛
马耳他
黑山