BIG T FAST ie 100 EVO3
BIG T_FASTie 100 EVO3 is a floor-standing module for the instantaneous production of large amount of domestic hot water.
The function of the module is to heat the domestic hot water through the plate heat exchanger using the energy coming from a buffer tank.
The advantage of this module is the production of domestic hot water in large volume, with a low primary flow temperature of 48°C (DHW set at
45°C). This allows the use of several energy sources, such as solar installations, heat pumps, biomass, etc.
The module is designed with the most advanced hydraulic technologies and electronic control ensuring the production of DHW up to 220 l/min.
DOUBLE PUMPS. The adjustment of the flow rate on the primary side through two modulating pumps in parallel ensures a constant DHW supply
even in case of a pump fault (up to 60% of the total DHW supply) and guarantees the absolute precision of DHW outlet temperature control
even at minimum withdrawal of flow rates. The energy transferred to the cold water flow is only the energy necessary to produce the DHW at the
required temperature.
ENERGY EFFICIENCY. The module is energy efficient, reduces energy waste and preserves the energy stored inside the buffer tank. This system is
superior than all other traditional forms of DHW production (tank with coil or instantaneous gas/electricity producers).
LARGE WITHDRAWAL APPLICATIONS. The floor-standing module is suitable for large withdrawal applications such as block of flats, sports facilities
(changing rooms, gyms or swimming pools, football fields, etc.), residences, camping and holiday resorts, clinics, offices, cowsheds (drinking
troughs, processes for controlled average temperatures) and any other applications that requires large production of DHW.
REDUCES THE RISK OF LEGIONELLA. Its design significantly reduces water stagnation volumes and thanks to the anti-legionella function which
activates an external system to raise the temperature, the risk of bacterium proliferation is reduced to a minimum.
AVAILABLE CONFIGURATIONS.
The module is offered in 8 configurations with 3 sizes of hot water output to cover the different system requirements and conditions of use.
In addition to the basic version (DHW instantaneous production), the module can be set up with other accessories completely assembled and
tested directly inside the factory:
- RECIRCULATION MODULE (R) for the management of the recirculation when all the users must be kept warm
- MIXING MODULE (M) to adjust and stabilize the temperature on the primary side whenever the buffer tank temperature is higher than 58°C.
The M module facilitates the stratification into the buffer tank and limits the formation of limescale into the plate heat exchanger preserving
the system's functionality over the time;
- DIVERTING MODULE (D) to optimize buffer tank stratification;
- CASCADE KIT to connect several DHW production units in parallel (up to 1200 l/min) with primary temperature of 55°C;
- REMOTE DATA SUPERVISION SYSTEM.
发售地区
| 欧洲 | 亚洲 | 南美洲 | 大洋洲 | 非洲 |
|---|---|---|---|---|
丹麦 | 中国 | 乌拉圭 | 新西兰 | 南非 |
乌克兰 | 亚美尼亚 | 巴西 | 澳大利亚 | 摩洛哥 |
俄罗斯 | 吉尔吉斯斯坦 | 阿根廷 | 突尼斯 | |
保加利亚 | 哈萨克斯坦 | 阿尔及利亚 | ||
克罗地亚 | 土耳其 | |||
冰岛 | 大韓 | |||
列支敦士登 | 巴林 | |||
匈牙利 | 朝鲜 | |||
北马其顿 | 格鲁吉亚 | |||
卢森堡 | 沙特阿拉伯 | |||
圣马力诺 | 阿塞拜疆 | |||
塞尔维亚 | 阿拉伯联合酋长国 | |||
塞浦路斯 | 黎巴嫩 | |||
奥兰 | ||||
奥地利 | ||||
安道尔 | ||||
希腊 | ||||
德国 | ||||
意大利 | ||||
拉脱维亚 | ||||
挪威 | ||||
捷克共和国 | ||||
摩尔多瓦 | ||||
摩纳哥 | ||||
斯洛伐克 | ||||
斯洛文尼亚 | ||||
斯瓦尔巴特群岛 | ||||
格恩西岛 | ||||
梵蒂冈 | ||||
比利时 | ||||
法国 | ||||
法罗群岛 | ||||
波兰 | ||||
波斯尼亚 黑塞哥维那 | ||||
泽西岛 | ||||
爱尔兰 | ||||
爱沙尼亚 | ||||
瑞典 | ||||
瑞士 | ||||
白俄罗斯 | ||||
直布罗陀 | ||||
立陶宛 | ||||
罗马尼亚 | ||||
芬兰 | ||||
英国 | ||||
荷兰 | ||||
葡萄牙 | ||||
西班牙 | ||||
阿尔巴尼亚 | ||||
马恩岛 | ||||
马耳他 | ||||
黑山 |
中文
