UniQuad® Translucent Polycarbonate Wall Systems

• Thickness: 4.25 in (108 mm) & 3 in (76 mm)
• Panel Width: 2 ft nominal (23.75 in) (603 mm)
• Panel Length: Up to 38 ft long
• Panel Weight: 1.5-2 lbs/ft²

Base Options

• Technology: Removable Skin Technology (RST) - Allows for the removal of the exterior panel while the interior panel remains in place
• Panel Joint: Structural member, mechanically interlocking, sealed joint
• Exterior Skin: 10 mm translucent polycarbonate panel with Nano-Cell® extrusion
• Interior Skin: 10 mm translucent polycarbonate panel with Nano-Cell® extrusion
• Glazing Color Options: Standard - Clear matte, white matte, ice white matte, blue matte, green matte (Note: all colors are available with a non-matte finish upon request. - consult KLA for other available color options, including bronze matte, gray matte, and other custom options)
• Bi-Color System: Option to select one color for the exterior glazing panel, and a different color for the interior glazing panel

Certifications + Test Results

• Code Compliance, IBC - ASTM D635, D1929, D2843, E84 per ESR-4745 - CC1 Rating
• Uniform Load Structural / Spans - ASTM E330 - Consult KLA for job specific span capabilities.
• Water Penetration - ASTM E331/TAS 202 - Pass
  
• Air Infiltration - ASTM E283 - Pass
  
• Sound Transmission Loss - ASTM E90, E1332 - STC: 24; OITC 17 (3 in system) / STC: 27-35; OITC 19-27 (4 in system)
• TAS 201/202/203 - Missile Impact Level D, Up to 95psf dependent upon span
  

Thermal Performance

• NFRC 100 - U-factor: 0.17-0.29*
  
• NFRC 201 - Solar Heat Gain Coefficient (SHGC) 0.18 to 0.34*
  
• NFRC 202 - Visible Transmittance - 0.10 to 0.34*
  

*Values subject to color selection and other options - see data sheet for full details and performance)