Ferroli关注

OMNIA ST 3.2 4/6

规格

规格

• OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and belongs to the new range of Ferroli Full Inverter R32 split heat pumps. “Split” means that the cooling circuit is divided between two units, Outdoor and Indoor. The Outdoor Unit contains the core of the cooling circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes to the Indoor Unit. On the other hand, the Indoor Unit contains the core of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow safe and practical installation. OMNIA ST 3.2 differs from OMNIA S 3.2 models for having integrated a Domestic Hot Water tank directly in the Indoor Unit. This storage tank has a 190L capacity for sizes 4 to 10, and 240L for larger models, from 12 to 16T. And that’s not all! OMNIA ST 3.2 can be customised according to your requirements, with a 18L inertial tank kit, a kit for solar integration of the storage tank or with a kit to manage 2 different zones, classic direct and mixed, if 2 different temperatures are required on the home terminals. Thanks to its wide operating range (among the largest on the market), OMNIA ST 3.2 works with as low as -25°C outdoor temperature and produces hot water up to 65°C under nominal conditions. The new Full Inverter by Ferroli concept uses DC inverter modulations on the 3 main energy-consuming components of the machine, namely: compressor, fan and pump. This allows the delivered power to be modulated, closely tracking the thermal load and allowing the user very high efficiencies and significant energy savings. Furthermore, the Full Inverter by Ferroli reduces inrush currents, avoiding sudden grid surges while guaranteeing a longer service life of the components. With the lowest noise levels on the market, OMNIA ST 3.2 can meet your system requirements, but can also easily be integrated with a Ferroli boiler (find out more about Factory Made Hybrids by Ferroli). The Outdoor Unit contains the core of the cooling circuit, whereas the Indoor Unit contains the core of the hydraulic circuit. OMNIA ST 3.2 is much more than a heat exchanger with a pump. The hydronic module includes all the main components of the system and can be customised according to the user’s needs. Stainless steel plate exchanger, pressure gauge and pressure sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator only some of the components you’ll find inside.

技术规格

技术规格

• 唯一参考OMNIAST3-2_4_6
• 产品系列HVAC - Heat Pumps
• 产品组Heat Pumps
• 类型对象（单个对象）
• 发布日期2022-05-12
• 版本号1

链接

链接

• 产品网址https://www.ferroli.com/int/products/hydronic-heat-pumps-cooling-heating-dhw/omnia-st-32
• 安装说明https://www.ferroli.com/int/products/hydronic-heat-pumps-cooling-heating-dhw/omnia-st-32
• 产品认证https://www.ferroli.com/int/products/hydronic-heat-pumps-cooling-heating-dhw/omnia-st-32
• 技术说明https://www.ferroli.com/int/products/hydronic-heat-pumps-cooling-heating-dhw/omnia-st-32

相关

相关

• 设计国家/地区意大利
• 制造国家/地区意大利

分类

分类

• BIMobject 类别暖通空调 - 热泵
• OmniClass 编号23-33 17 13
• OmniClass 标题Split System Heat Pumps