Base 200 - Toilet Paper Holder

All products in the Base & Solid series have a self-adhesive back. Easy to mount without drilling.

Attached to permanent smooth surfaces such as tiles, lacquered or veneered board material etc. It is not advisable to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can slide as for example the wet room wallpaper. On newly tiled walls, it is important that the surface is cleaned thoroughly so that no joint film remains on the mounting surface.

In case of uncertainty consult a professional.

Mounting instructions

1. Clean the substrate thoroughly and allow it to dry. (The detergents shall not contain oil)
2. Remove the protective film.
3. Apply the product by pressing it against the substrate for 10 seconds.
4. For the best results, allow the glue to harden for 24 hours before use.

When cleaning the product, use a clean, damp cloth.