ALUTECH Group of Companies关注

Dock leveller telescopic lip

规格

规格

• Specification
  Length of the dock leveller:	2000 mm 2500 mm 3000 mm 3500 mm 4000 mm 4500 mm
  Width of the dock leveller:	1750 mm 2000 mm 2500 mm
  Height of the dock leveller:	600 mm 700 mm 800 mm 900 mm
  Load capacity:	60 kN
  Steel sheet thickness of the hinged part:	8/10 mm
  Steel sheet thickness of the lip:	12/14 mm
  Lip length:	500 mm (1000 mm - optional)
  Operating temperature range:	-40 … +50
  Models of dock leveller:	It is chosen depending on the stage of construction works and characteristics of a particular facility. S - frameless model for mounting in preliminary prepared pit after finishing W - frame model for mounting in preliminary prepared pit after finishing C - frame model for mounting in preliminary prepared pit before laying of the final floor B - model with a frame that allows pouring of the concrete at the stage of ramp construction
  Protective coating:	The metal parts of the leveller are treated by bead blasting and coated with 2-component enamel. Coating thickness: 100 microns
  Standard colours:	RAL 9017 (black); RAL 7016 (anthracite grey); RAL 5002 (blue).
  Construction of dock leveller:	Frame, hinged part, telescopic lip, support beam, reinforcing plates of hinged part, reinforcing ribs of the lip, hydraulic unit, two lifting hydraulic cylinders, hydraulic lip cylinder, control unit
  Frame:	Made of steel and is designed for mounting the dock leveller to the pit
  Hinged part:	Made of hot-rolled steel sheets
  Supporting beam:	Designed for mounting of the main lifting cylinders. Support beam is a roll-formed channel 150×90×60 mm, steel thickness: 5 mm.
  Reinforcing plates of the hinged part:	Make the hinged part of the dock leveller more durable and enable to twist at least 3 % (≈ 1.7 degrees) in the cross direction. This allows to level the lateral pitch that occurs when the vehicle tilts to the side. The number of reinforcing plates: 8 PCs. Size of plates: 175×60×3 mm
  Telescopic lip with reinforcing ribs:	The lip is placed in the vehicle body. The hot-rolled sheets of steel 12/14 mm thickness with lenticular corrugation are used for manufacturing the lip. Reinforcing ribs of the lip are made of 138x80x80 mm profile. Steel thickness: 6 mm
  Hydraulic unit:	Provides hydraulic oil flow to the cylinders, which operate the main part lifting and the lip movement. The tank capacity of the hydraulic unit is 7 l. The length of electric cables used for the hydraulic unit is 7 or 10 m (depending on the length of the dock leveller)
  Lifting cylinders:	Two hydraulic lifting cylinders are included in standart kit. Lifting cylinders drive the hinged part of the dock leveller. The plungers of the cylinders have a corrosion resistant coating. The external diameter of cylinders is 60 mm.
  Hydraulic lip cylinder:	Provides the lip movement. The plunger of cylinder has a corrosion resistant coating. The external diameter of the lip cylinder is 50 mm
  Control unit (CUL 11):	The standard leveller kit includes the control unit. Supply voltage: 3~230/400 V Utility frequency: 50 Hz Electric motor power: <1,5 kW Working power in standby mode: <5 W Nominal source voltage of valve: 24 V direct current Section of wires connected to the socket, mm2: max. 2.5 Enclosure protection: IP54 (professional installation) Operating temperature range, ° C: −25…+40 Power cord length / section of wire: not less than 1 m / 1.5 mm2
  Safety systems:	1. Protection from misalignment - two lifting cylinders 2. Automatic locking of hydraulics in case of accidental rollback of the transport while unloading 3. Automatic locking of hydraulics when there is a power failure 4. Protection of the lip from deformation - manufacturing of the lip from a solid steel sheet 5. Protection of feet from becoming trapped - protective shutters 6. Protection of hinged part against breakage - reinforcing plates 7. Protection against sliding of the loader wheels on the dock leveller surface - lentil corrugation of hinged part and lip 8. Supporting beam for the service and repair maintenance

技术规格

技术规格

• 唯一参考dock-leveller-telescopic-lip
• 产品系列Dock levellers
• 产品组Dock levellers
• 类型对象（单个对象）
• 发布日期2022-04-13
• 版本号1

链接

链接

• 产品网址https://old.alutech-group.com/en/products/loading_equipment/dock_leveller_with_telescopic_lip/alutech_tl
• 安装说明https://old.alutech-group.com/upload/iblock/e91/r7090143.pdf
• 指导视频https://www.youtube.com/watch?v=8W8oHh744uA&list=PLzzzlyiTnYWR7noL2x9Io23-LXylvVCeu&index=2

相关

相关

• 主材料钢
• 设计国家/地区白俄罗斯
• 制造国家/地区白俄罗斯

分类

分类

• BIMobject 类别加载设备 - 月台调整板
• IFC 分类斜坡
• UNSPSC 名称Lift stations
• UNSPSC 代码47101533
• Uniclass 2015 代码Pr_65_80_23
• Uniclass 2015 说明Dock levellers
• CSI MasterFormat 2014 代码11 13 19.13
• CSI MasterFormat 2014 标题Loading Dock Levelers
• OmniClass 编号23-23 23 13 15
• OmniClass 标题Hydraulic Dock Levelers
• CSI UniFormat II 代码E10
• CSI UniFormat II 标题EQUIPMENT