Insulated Sectional Steel Doors Thermospan® Model 200

Wayne Dalton Thermospan® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.

The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corrosion.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

规格

Key Product Features
- Max Width: 40’2”
- Max Height: 32’1”
- Polyurethane insulation, R-value* = 17.5, U-value* = .057
- 2” section thickness
- 10,000 cycle standard spring
- Patented, roll-formed integral struts for rigidity
- Embossed stucco exterior with pinstripes
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Door Construction
- Joint seal prevents air infiltration and saves energy
- Thermal break separates inner and outer skins so virtually no heat or cold is conducted through the section.
- Pre-painted inner and outer skins for added corrosion resistance. Both skins are also hot-dipped galvanized steel for further protection against corrosion.
- Solid polyurethane core provides maximum thermal efficiency and aids in quiet operation
- Integral struts – Two 1-3/4” roll-formed struts per section increase rigidity and strength.
- Two-inch nominal thickness
- Embossed pinstriping (grooves) on the embossed stucco outer skin adds strength and enhances appearance.
IECC® Compliant
The Thermospan® Model 200 meets IECC® requirements for maximum U-factor of operable fenestrations (2015 Section C402.4) with a 3rd party certified tested value of less than 0.37. Thermospan® Model 200 also meets the ASHRAE 90.1 and IECC® requirement for maximum air leakage for fenestration assemblies (2015 Section C402.5.2 Garage doors) with a 3rd party certified tested value of less than 0.40.
Options & Accessories
- Pass door
- Chain hoist operation
- Motor operation
- Sensing edges
- Photo eyes
- High cycle spring (25k, 50k, 100k)
- 3” track option
- Solid shafts
- Perimeter weather seal
- Special track designs
- Mullions
Impact Panel
Wayne Dalton’s optional Impact Section replaces the traditional bottom section on doors exposed to damage from forklifts and other warehouse traffic.
Reduces downtime and costly repairs
Impact-Resistant composite skins surround an expanded polystyrene core
Fully adaptable to multiple door thicknesses with hinge and section adapters to provide a superior fit
Available for 21" and 24" sections
Available from 8’2” to 16’2” wide in one-foot increments

技术规格

唯一参考insulated-sectional-steel-door-200
产品系列Commercial Doors
产品组Sectional Doors
类型对象（单个对象）
发布日期2023-12-08
版本号1

链接

North America
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States