发布您的产品
QF In Cut 45®
QF In Cut 45®

    QF In Cut 45®

    Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

    Quick-Fit® In Cuts, also known as Saddle Taps, are standard with QF rolled ends, allowing quick connections with other QF® ductwork. Used to cut into existing duct lines to begin a new Quick-Fit (QF) section.

    • When ordering, specify material; gauge (if nonstandard); dimensions A and C; and end styles if not all QF.
    • Saddle length and width = 3" all directions from Branch Tube C
    • Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
    • Available with 30° angle
    • Available with flanged ends in diameters up to 72", and other various end types
    • Optional gauges 18, 16, 14, 12 and 10

    Contact Nordfab or your local Nordfab dealer for assistance with optional end types, larger sizes, and material / gauge options.

    Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

    规格
    • A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.

      1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
      2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.

        B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

        1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
        2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.

        C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

        1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
        2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.
      技术规格
      • 唯一参考us-qf-in-cut-45-degree
      • 产品系列Quick-Fit Clamp Together Ducting
      • 产品组Branches
      • 类型对象(单个对象)
      • 发布日期2024-05-08
      • 版本号1
      相关
      • 主材料镀锌钢板
      • 次要材料Stainless steel 304
      • 设计国家/地区United States
      • 制造国家/地区United States
      分类
      • BIMobject 类别暖通空调 - Dust Collection
      • IFC 分类风管管件
      • ETIM 代码EG015540
      • ETIM 名称Fittings, flanges and connectors
      • Uniclass 2015 代码Pr_65_65_25
      • Uniclass 2015 说明Ductwork and fittings
      • CSI MasterFormat 2014 代码23 31 13.19
      • CSI MasterFormat 2014 标题Metal Duct Fittings
      • OmniClass 编号23-33 49 00
      • OmniClass 标题HVAC Ductwork

      发售地区

      North America
      Belize
      Bermuda
      British Virgin Islands
      Canada
      Collectivity of Saint Martin
      Costa Rica
      Mexico
      Panama
      Puerto Rico
      United States