LINA Very Compact Linear Line Array Loudspeaker

Meyer Sound

LINA Very Compact Linear Line Array Loudspeaker

The LINA™ compact linear line array loudspeaker excels in array performance while providing exceptional high frequency headroom, phase coherence, and consistent coverage. Its light weight and small size are ideal for venues that require a low-profile, high-power, curvilinear array system with exceptional fidelity, such as small theaters, theme parks, houses of worship, and AV systems.

Features and Benefits

Small footprint and narrow width are ideal for small venues and fill applications
Amazing power-to-size ratio
Exceptional linearity and transient reproduction at any level, high peak power output, and extremely low distortion
Self-powered to simplify setup and increase reliability
Flexible rigging for flown and ground-stacked arrays
Easy integration with Meyer Sound’s LEOPARD line array loudspeaker, and the 750-LFC and 900-LFC low frequency control elements

Applications

Small theaters and houses of worship
Touring productions, ballrooms, and corporate AV
Theme parks
Front-fill and under-balcony coverage
Side-fill for LEOPARD systems

规格

The loudspeaker shall be a compact, self-powered, linear, low-distortion, line array loudspeaker. Its transducers shall include two 6.5 in long-excursion cone drivers and one 3 in diaphragm compression driver coupled to a constant-directivity horn through a patented REM manifold.
The loudspeaker shall incorporate internal processing and a 3-channel, class D amplifier. Processing shall include equalization, phase correction, driver protection, and signal division. Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range shall be 65 Hz–18 kHz; phase response shall be 100 Hz–18 kHz ±45 degrees; linear peak SPL shall be 132 dB, measured free-field with M-noise at 4 m referred to 1 m. Audio connectors shall be XLR 3-pin, female and male, accommodating balanced audio, or XLR 5-pin, accommodating both balanced audio and RMS.
The internal power supply shall perform EMI filtering, soft current turn-on, and surge suppression. Power requirements shall be nominal 100, 110, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100–240 V AC at 50–60 Hz.
AC power connectors for input and loop output shall be powerCON 20. Maximum long-term continuous current draw shall be 2.3 A rms at 115 V AC, 1.16 A rms at 230 V AC, and 2.8 A rms at 100 V AC. The loudspeaker shall accommodate an optional RMS remote monitoring system module.
Components shall be mounted in an optimally tuned, vented enclosure constructed of premium multi-ply birch with a slightly textured black finish. The enclosure shall include end-frames with captive GuideALinks to link units in a vertical array at splay angles from 1 to 11 degrees. The front protective grille shall be powder-coated, hex-stamped steel with acoustical black mesh.
Dimensions shall be 20.27 in (515 mm) wide x 8.38 in (213 mm) high x 15.32 in (389 mm) deep. Weight shall be 43 lb (19.5 kg).
The loudspeaker shall be the Meyer Sound LINA.
Keyword: Loudspeaker, Loudspeakers