Об'єкти BIM – скачати безкоштовно! STICK SLT9 - Trim 09 - Adjustable LED Single Lamp Pendant

STICK SLT9 - Trim 09 - Adjustable LED Single Lamp Pendant

The SLT9 is a 2, 3 and 4 ft. single, or 6 and 8 ft. double wall mount cantilievered fixure that may be installed stand-alone or in continuous runs. SLT9 is mounted to a Rail System, which is a continuous wireway and driver housing. • The back plate has a 7 /8” opening for direct conduit feed that can be anywhere along the Rail or at the end caps, and is not intended for J-box mount. • Projections are available in lengths of 6, 12, 18 and 24 inches, standard. Also available in custom lengths (specify). • Projections over12 inches require aircraft cable support (4 ft. cable and angle-adusting cable grippers supplied). WHITE LEDs • Samsung tight bin chips on aluminum clad boards. 80 CRI. • W30 (3000K), W35 (3500K), and W40 (4000K) white color temperatures. CUSTOM LUMEN OUTPUT Factory-set custom reduced lumen output. Order XL . Specify lumens. • cUL listed for dry locations.

Специфікація

LED OPTIONS 120/277V, 50/60 Hz. STANDARD DIMMING Programmable, 0–10V, dims to 1%. LUTRON DIMMING DRIVERS BDIM-W9 • Lutron Hi-Lume L3DA Series, 3-wire • Dims to 1% BDIM-W11 • Lutron EcoSystem LDE14 Series • Dims to 1% • Fade to off. EMERGENCY Charge indicator light and test switch visible from below. (Remote test switch available.) Voltage must be specified EM7–7W for 90 minutes. EM12 –12W for 90 minutes.

Технічна специфікація