Публікуйте свої продукти
TrenchFormer ® TFX
ABT, Inc.

TrenchFormer ® TFX

TrenchFormer  6″- 24″

TrenchFormer is a pre-engineered, cast-in-place concrete forming system for forming surface drainage trenches, catch basins, utility chases, and voids in concrete placements. The system includes expanded polystyrene (EPS) form profiles, steel inlay rails, patented no-float legs, grates, and grate retainers. TrenchFormer is available in various width, depths, slopes and trench bottom configurations. TrenchFormer replaces hand-forming, heavy materials, keyways and waterstops normally required with trench drains and utility chases.
Its components are made in the most commonly constructed sizes. TrenchFormer consists of 8 ft. (2.4 M ) pre-sloped form segments.  Former sections are available in a variety of slopes.
The segments have integral deforming grooves for easy removal and full length longitudinal grooves for coplanar rail spacing.
The steel components are angle rails with anchoring studs welded on 11 in. (280 mm) centers to the outside corners. 1/2 in. (12.7 mm) threaded U-shaped no-float legs attach to horizontal tabs on each rail. Each rail end is designed to accept a Rail Alignment Clip which retains adjacent rail segments.
Prefabricated L-rail and T-rail assemblies allow for field installation of 90° turns anywhere in the pre-sloped layout.  These assemblies have rail reinforcement built into the areas where the grates are unsupported in other systems. This reinforcement provides load capacity for AASHTO H2O load ratings.
Outlet piping is butted to an annular groove made in the EPS form prior to concreting. For trench junctions or for large outlet sizes, four catch basins are provided. A selection of gratings and solid covers is available for various loadings.

Технічна специфікація
  • Унікальний номерtrenchformer-tfx
  • Сімейство продуктівCast in Place Trench Drain
  • Група продуктівTrenchformer TFX
  • ТипObject (single object)
  • Дата публікації2020-06-26
  • Номер видання1
Посилання
Пов'язані
  • Матеріал основнийSteel
  • Матеріал допоміжнийPolystyrene (EPS)
  • Розроблено вUnited States
  • Виготовлено вUnited States
Класифікація
  • Категорія BIMobjectСантехніка - Водовідведення
  • Код Uniclass 2015Pr_65_52_24_24
  • Опис Uniclass 2015Drainage channels with gratings
  • Код CSI MasterFormat 201433 46 00
  • Заголовок CSI MasterFormat 2014Subdrainage
  • Номер OmniClass23-39 29 11
  • Заголовок OmniClassWaste Water Drains
  • Код CSI UniFormat IID2040
  • Заголовок CSI UniFormat IIRain Water Drainage

Доступність регіону

Північна Америка
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States

Схожі продукти