Publiko produktet
Protecta FR Damper
Protecta FR Damper
    Polyseam

    Protecta FR Damper

    Protecta® FR Damper is used to fire proof ventilation ducts which penetrate fire rated constructions such as fire compartments and fire walls; preventing the passage of fire and smoke (surrounding and inside the ventilation duct).

    The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire. The aperture surrounding the dampers are fire sealed with Protecta fire stopping products.

    The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed.

    The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.

    Available in the following sizes: Ø63, Ø80, Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400, Ø500, Ø630, Ø800, Ø1000 and Ø1250.

    Özellikler
      • Maintenance-free and no electrical connections necessary.
      • The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
      • An aperture can include several dampers and in addition, technical services such as cables, cable trays and pipes.
      • The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
      • Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
      • Keeps the temperature in the duct network lower than 120°C, protecting fans and sensitive units in the system.
      • Insulation of ducts is not necessary.
      • Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
      • The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to easily fit the dampers.
      • The dampers are attached to the inside of the ducts, giving the benefit of space-saving.
      • The dampers are only 15 cm long and bends can be connected right behind the fire seal (also available to order in other sizes).
      • The damper can be attached to a vent on one side.
    Teknik özellikler
    • Benzersiz ref.Protecta_FR_Damper
    • Ürün ailesiProtecta
    • Ürün grubuFR Damper
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2020-03-17
    • Baskı numarası1
    • Derinlik (mm)150
    İlgili
    • Ana malzemeGalvanize Çelik
    • Tasarım yeriİngiltere
    • Üretim yeriİngiltere
    Sınıflandırma
    • BIMobject kategorisiYangın Ürünleri - Yangın Durdurucular
    • IFC sınıflandırmasıNesne

    Bölge bulunurluk durumu

    Avrupa
    Åland
    Almanya
    Andorra
    Arnavutluk
    Avusturya
    Belçika
    Beyaz Rusya
    Bosna Hersek
    Bulgaristan
    Cebelitarık
    Çek Cumhuriyeti
    Danimarka
    Estonya
    Faroe Adaları
    Finlandiya
    Fransa
    Guernsey
    Hırvatistan
    Hollanda
    İngiltere
    İrlanda
    Isle of Man
    İspanya
    İsveç
    İsviçre
    İtalya
    İzlanda
    Jersey
    Karadağ
    Kıbrıs
    Kuzey Makedonya
    Letonya
    Liechtenstein
    Litvanya
    Lüksemburg
    Macaristan
    Malta
    Moldova
    Monako
    Norveç
    Polonya
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan