Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Özellikler

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Teknik özellikler

Benzersiz ref.meyersound-ashby
Ürün ailesiLoudspeakers
Ürün grubuULTRA
TipObje (Tekil Nesne)
Yayınlanma tarihi2020-03-12
Baskı numarası2

Bağlantılar

Ürün URL’sihttps://meyersound.com/product/ashby/
Kurulum talimatlarıhttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Ürün belgelendirmesihttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Teknik açıklamahttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

İlgili

Ana malzemeAlüminyum
Tasarım yeriBirleşik Devletler
Üretim yeriBirleşik Devletler

Sınıflandırma

BIMobject kategorisiElektronikler - Ses Sistemleri
IFC sınıflandırmasıNesne
Uniclass 2015 koduPr_70_75_36_50
Uniclass 2015 açıklamasıLoudspeakers
CSI MasterFormat 2014 kodu27 24 23
CSI MasterFormat 2014 başlığıAudio-Video Devices
OmniClass numarası23-37 15 29 11 13
OmniClass başlığıLoudspeakers

Bölge bulunurluk durumu

Avrupa	Asya	Kuzey Amerika	Afrika	Güney Amerika	Okyanusya
Åland	Afganistan	Anguilla	Angola	Arjantin	Amerikan Samoası
Almanya	Azerbaycan	Antigua ve Barbuda	Batı Sahara	Bolivya	Avustralya
Andorra	Bahreyn	Aruba	Benin	Brezilya	Cook Adaları
Arnavutluk	Bangladeş	Bahamalar	Botswana	Ekvador	Fiji
Avusturya	Bhutan	Barbados	Burkina Faso	Falkland Adaları (Islas Malvinas)	Fransız Polinezyası
Belçika	Birleşik Arap Emirlikleri	Belize	Burundi	Fransız Guyanası	Guam
Beyaz Rusya	British Indian Ocean Territory	Bermuda	Çad	Guyana	Kiribati
Bosna Hersek	Brunei Sultanlığı	Birleşik Devletler	Cape Verde	Kolombiya	Kuzey Mariana Adaları
Bulgaristan	Christmas Adası	Caribbean Netherlands	Cezayir	Paraguay	Marshall Adaları
Cebelitarık	Çin	Cayman Adaları	Cibuti	Peru	Mikronezya Federal Devletleri
Çek Cumhuriyeti	Cocos Adaları	Curaçao	Comoros	Şili	Nauru
Danimarka	Endonezya	Dominik	Demokratik Kongo Cumhuriyeti	Surinam	New Caledonia
Estonya	Ermenistan	Dominik Cumhuriyeti	Ekvator Ginesi	Uruguay	Niue
Faroe Adaları	Filipinler	El Salvador	Eritre	Venezuela	Norfolk Adası
Finlandiya	Filistin	Grenada	Esvatini̇		Palau
Fransa	Güney Kore	Grönland	Etiyopya		Papua Yeni Gine
Guernsey	Gürcistan	Guadeloupe	Fas		Pitcairn Adaları
Hırvatistan	Hindistan	Guatemala	Fildişi Sahili		Samoa
Hollanda	Hong Kong	Haiti	Gabon		Solomon Adaları
İngiltere	İsrail	Honduras	Gambiya		Timor-Leste
İrlanda	Japonya	İngiliz Virjin Adaları	Gana		Tokelau
Isle of Man	Kamboçya	Jamaika	Gine		Tonga
İspanya	Katar	Kanada	Guinea-Bissau		Tuvalu
İsveç	Kazakistan	Kostarika	Güney Afrika		United States Minor Outlying Islands
İsviçre	Kırgızistan	Küba	Güney Sudan		Vanuatu
İtalya	Kuveyt	Martinique	Kamerun		Wallis ve Futuna
İzlanda	Kuzey Kore	Meksika	Kenya		Yeni Zelanda
Jersey	Laos	Montserrat	Kongo
Karadağ	Lübnan	Nikaragua	Lesotho
Kıbrıs	Macau	Panama	Liberya
Kuzey Makedonya	Maldivler	Porto Riko	Libya
Letonya	Malezya	Saint Barthélemy	Madagaskar
Liechtenstein	Moğolistan	Saint Kitts ve Nevis	Malavi
Litvanya	Myanmar (Burma)	Saint Lucia	Mali
Lüksemburg	Nepal	Saint Martin	Mauritius
Macaristan	Özbekistan	Saint Pierre ve Miquelon	Mayotte
Malta	Pakistan	Saint Vincent ve Grenadines	Mısır
Moldova	Singapur	Sint Maarten	Moritanya
Monako	Sri Lanka	Trinidad ve Tobago	Mozambik
Norveç	Suriye	Turks ve Caicos Adaları	Namibya
Polonya	Suudi Arabistan	Virjin Adaları	Nijer
Portekiz	Tacikistan		Nijerya
Romanya	Tayland		Orta Afrika Cumhuriyeti
Rusya	Tayvan		Reunion
San Marino	Türkiye		Ruanda
Sırbistan	Türkmenistan		Saint Helena
Slovakya	Umman		São Tomé ve Príncipe
Slovenya	Ürdün		Senegal
Svalbard	Vietnam		Seychelles
Ukrayna	Yemen		Sierra Leone
Vatikan			Somali
Yunanistan			Sudan
			Tanzanya
			Togo
			Tunus
			Uganda
			Zambiya
			Zimbabwe