Publiko produktet
CWPA 800 Concrete Waterproofing Admixture

CWPA 800 Concrete Waterproofing Admixture

CWPA 800 is a non-toxic, volatile organic compound (VOC) free, liquid admixture formulated to react with the hydroxide ions produced by the cement hydration process. In doing so, CWPA 800 creates additional hydration products within the capillary pores and blocks them, effectively shutting down moisture vapor movement through the concrete. Manufactured with deionized water to remove trace mineral ions and containing no chloride
based materials, CWPA 800 will not promote nor contribute to corrosion of embedded or reinforcing steel.
CWPA 800 has been specifically formulated for use in normal and light weight concrete mixes to produce low permeability concrete across a wide spectrum of mix designs. Typical uses of CWPA 800 include but are not limited to:

• Elevator pits and retaining walls
• Water retaining structures such as swimming pools and cisterns
• Foundations
• Walls
• Footings and other underground structures
• Civil engineering projects of any magnitude
CWPA 800 has no w/cm range limitation. ISE LOGIK Industries would be happy to participate in your testing of the desired project mix to determine if CWPA 800 can achieve the desired concrete properties.

Özellikler
  • Each manufactured lot of CWPA 800 is produced under some of the most exacting chemical manufacturing processes available. CWPA 800 has been proven to significantly enhance the physical properties of ready-mixed concrete through extensive independent testing.

    • Reduced Permeability (per ASTM D5084):
    o 98% less permeable as compared to non-treated specimen
    o Protects against alkali and efflorescence attack from the concrete
    o Inhibits corrosion due to decreased permeability of concrete

    • Mitigating Effect on ASR (per ASTM C1260):
    o 10% reduction of effects of ASR compared undosed control

    • Mitigating Effect on Shrinkage (per ASTM C157):
    o 10% shrinkage reduction by day 28 from casting of specimen
    o Reduces slab warp, plastic shrinkage cracking and crazing

    • Rapid Strength Gain (per ASTM C39/39M):
    o Achieves design strength in as little as three days after casing of specimen due to internal curing
    o No thermal cracking

    • Type S Admixture (per ASTM C494/C494M)
    o Full compliance with published requirements

    • Completely blocked water migration through hardened concrete
    o Per CRD C48-92

Teknik özellikler
  • Benzersiz ref.cwpa-800-concrete-waterproofing-admixture
  • Ürün ailesiMoisture Mitigation
  • Ürün grubuAdmixtures
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-09-02
  • Baskı numarası1
İlgili
  • Ana malzemeCementitious
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiZemin Kaplama - Döşeme Sistemleri
  • UNSPSC adıConcrete and cement and plaster
  • UNSPSC kodu3011
  • Uniclass 2015 koduPr_20_31_03
  • Uniclass 2015 açıklamasıAdmixtures
  • CSI MasterFormat 2014 kodu03 00 00
  • CSI MasterFormat 2014 başlığıConcrete
  • OmniClass numarası23-13 15 11
  • OmniClass başlığıConcretes

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları