Publiko produktet
Wilshire Planters, Steel Rectangle & Square
Wilshire Planters, Steel Rectangle & Square
    Tournesol

    Wilshire Planters, Steel Rectangle & Square

    3.9 out of 5 stars3.9(7 reviews)

    Wilshire planters, our most popular collection, are available in powder-coated mild steel with a zinc-rich primer and stainless-steel base.

    Features

    • 12-gauge steel with stainless steel base
    • Engineered to resist deformation
    • Toe kick or full bottom options
    • Powder-coat over zinc-rich primer to reduce rusting
    • Drain holes standard

    Product Options

    Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options.  Note -  not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

    Özellikler
    • Guide Specification Section 

      129300 Site Furnishings Section
      129200
      Interior Planters
      Tournesol Siteworks Wilshire Steel Planters

      1.0 GENERAL 

      1.1 WORK INCLUDED 
      A. Provision of steel planters 

      1.2 RELATED WORK
      A. Section 033000 Cast-in-Place concrete
      B. Section 061000 Rough Carpentry
      C. Section 062000 Finish Carpentry 

      1.3 SUBMITTALS
      A. Product Data: Manufacturer's standard catalog cut sheets.
      B. Samples: As required for color selection or material thickness only.
      C. Shop Drawings: For custom applications, showing critical sizes and dimensions for installation and integration with other work. 

      1.4 DELIVERY, STORAGE AND HANDLING
      A. Unwrap and inspect planters after delivery for signs of damage during transit.
      B. Protect planters from damage during storage and handling.
      C. Store planters indoors if possible. Do not stand or walk on planters or planter liners. 

      1.5 PROJECT CONDITIONS
      A. Contractor to provide adequate structural support for planters. Unless otherwise specified, planters should have continuous basal support.
      B. Protect units from damage by adjacent work.

      2.0 PRODUCTS
      2.1 ACCEPTABLE PRODUCTS/MANUFACTURERS
      A. Wilshire Steel Planters, manufactured by Tournesol Siteworks LLC. 2930 Faber St., Union City, CA 94587 Tel: (800) 542-2282 FAX (510) 471-6243

      2.2 WILSHIRE STEEL PLANTERS
      A. Materials
      1. Weathering Steel Planters – ASTM A606 12 ga. (0.105”) sheet, formed and welded. ASTM A588 3/16” (0.1875”) may be substituted for custom projects where required. Wall reinforcement elements of the same material are attached as required.

      2. Powdercoated Steel Planters – Body ASTM A1011 hot rolled commercial carbon steel sheet, formed and welded. Wall reinforcement elements of the same material are attached as required. Floor ASTM A240 (304) stainless steel sheet with a 2B finish.

      B. Construction – WWRSP119, Rev. 1 Planter bodies to be formed and fully welded at vertical seams. Top lips, where applicable, to be press broke, seam welded. Lips on powdercoated carbon steel planters ground to smooth. Floor fastened water-tight to the body. The floor may be fastened with a 2” toe-kick/reveal, or flush to the bottom. Planters delivered with 1-5/8” drain holes unless specified otherwise.

      C. Performance characteristics – Vertical wall panels will not deform more than L/200 when loaded with 90 lbs/cu ft. soil media. Similar performance with heavier soil media is available by specification.

      D. Finish: specified finish; factory finished.
      1. Weathering Steel - unless otherwise specified, weathering steel planters finished to mill specification
      2. Carbon steel –
      a.: Following fabrication, the planter shall be cleaned and treated with an iron phosphate process before the coating application. This process shall include a non-chromated alkaline cleaner, and an iron phosphate treatment, followed with an acidic sealer for maximum adhesion. Corrosion-resistant zinc undercoat shall be applied, 1-2mils thick. The protective powder coat shall be polyester or polyester TGIC powder, a minimum 4 mils thick. Following application parts shall be baked until properly cured. b. Optional Tier-2 Finishes (Silvadillo, Jaguar Topaz): An additional clear overcoat of 1-2 mils 

      E. Sizes: Modular units fabricated to size by the manufacturer as required to fill specified areas. Refer to the catalog for standard sizes. Custom sizes as per approved shop drawings. 

      2.3 PLANTER OPTIONS
      A. Drainage hole factory drilled prior to delivery. Specify for planters without drain holes
      B. Scoop connections – adjacent planter walls may be lowered to allow multiple modular units to appear to be one continuous unit. Optional connection kits are also available, contact the manufacturer before ordering
      C. Custom accessory pockets are available for lighting, audio, electrical, or other elements. Submit a sample of specified housing with the order, and confirm size and location on shop drawings.
      D. Casters are available for most small- and medium-sized planters, using polyurethane wheels. Non-locking casters recessed in a planter, bottom of skirt approx.1/2” from the surface. B. Wilshire steel planters may be configured as Bioretention/Flowthrough planters, verify with the manufacturer before ordering. 

      3.0 EXECUTION 

      3.1 PREPARATION
      A. Before planter fabrication, the contractor shall verify the as-built dimensions of the planter area or receptacles to ensure the proper size, fit, and quantity required.1

      3.2 INSTALLATION
      A. Install planters to allow for easy removal if necessary. B. Provide continuous basal support. C. Install level to permit adequate drainage and irrigation.

    Teknik özellikler
    • Benzersiz ref.wilshire-planters-powder-coated-steel-rectangle-and-square
    • Ürün ailesiWilshire Collection
    • Ürün grubuWilshire Metal Planters
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2024-03-13
    • Baskı numarası1
    İlgili
    • Ana malzemeÇelik
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiPeyzaj - Peyzaj

    Bölge bulunurluk durumu

    Avrupa Kuzey Amerika Asya Güney Amerika
    Åland
    Anguilla
    Azerbaycan
    Arjantin
    Almanya
    Antigua ve Barbuda
    Bangladeş
    Bolivya
    Andorra
    Aruba
    Bhutan
    Brezilya
    Arnavutluk
    Bahamalar
    British Indian Ocean Territory
    Ekvador
    Avusturya
    Barbados
    Brunei Sultanlığı
    Falkland Adaları (Islas Malvinas)
    Belçika
    Belize
    Christmas Adası
    Fransız Guyanası
    Beyaz Rusya
    Bermuda
    Çin
    Guyana
    Bosna Hersek
    Birleşik Devletler
    Cocos Adaları
    Kolombiya
    Bulgaristan
    Caribbean Netherlands
    Endonezya
    Paraguay
    Cebelitarık
    Cayman Adaları
    Ermenistan
    Peru
    Çek Cumhuriyeti
    Curaçao
    Filipinler
    Şili
    Danimarka
    Dominik
    Güney Kore
    Surinam
    Estonya
    Dominik Cumhuriyeti
    Gürcistan
    Uruguay
    Faroe Adaları
    El Salvador
    Hindistan
    Venezuela
    Finlandiya
    Grenada
    Hong Kong
    Fransa
    Grönland
    Japonya
    Guernsey
    Guadeloupe
    Kamboçya
    Hırvatistan
    Guatemala
    Kazakistan
    Hollanda
    Haiti
    Kırgızistan
    İngiltere
    Honduras
    Kuzey Kore
    İrlanda
    İngiliz Virjin Adaları
    Laos
    Isle of Man
    Jamaika
    Macau
    İspanya
    Kanada
    Maldivler
    İsveç
    Kostarika
    Malezya
    İsviçre
    Küba
    Moğolistan
    İtalya
    Martinique
    Myanmar (Burma)
    İzlanda
    Meksika
    Nepal
    Jersey
    Montserrat
    Özbekistan
    Karadağ
    Nikaragua
    Pakistan
    Kıbrıs
    Panama
    Singapur
    Kuzey Makedonya
    Porto Riko
    Sri Lanka
    Letonya
    Saint Barthélemy
    Tacikistan
    Liechtenstein
    Saint Kitts ve Nevis
    Tayland
    Litvanya
    Saint Lucia
    Tayvan
    Lüksemburg
    Saint Martin
    Türkmenistan
    Macaristan
    Saint Pierre ve Miquelon
    Vietnam
    Malta
    Saint Vincent ve Grenadines
    Moldova
    Sint Maarten
    Monako
    Trinidad ve Tobago
    Norveç
    Turks ve Caicos Adaları
    Polonya
    Virjin Adaları
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan