Publiko produktet
Wilshire Planters, Aluminum Rectangle & Square
Wilshire Planters, Aluminum Rectangle & Square
    Tournesol

    Wilshire Planters, Aluminum Rectangle & Square

    Wilshire planters, our most popular collection, are available in powder-coated marine-grade aluminum. Aluminum is a great choice for planters. It is lightweight, adding less to the overall load. It is easier to deliver, assemble, and complete installation. It’s also environmentally friendly, requiring less energy to produce, build, and recycle.

    Features

    • 100% recyclable marine-grade aluminum
    • Same strength as Wilshire Steel but weighs 40-60% less
    • Engineered for strength with welded stiffeners
    • Laser-cut & welded for consistent thickness and edge detail at any scale
    • Powder-coat over zinc-free epoxy primer

    Product Options

    Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options.  Note -  not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

    Özellikler
    • Guide Specification Section 

      129300 Site Furnishings Section
      129200
      Interior Planters
      Tournesol Site
      works Wilshire Aluminum Planters

      1.0 GENERAL 

      1.1 WORK INCLUDED 

      A. Provision of Aluminum planters

      1.2 RELATED WORK

      A. Section 033000 Cast-in-Place concrete
      B. Section 129233 Interior Planters
      C. Section 129333 Manufactured Planters
      D. Section 329433 Planters
      E. Section 129300 Site Furnishings 

      1.3 SUBMITTALS
      A. Product Data: Manufacturer's standard catalog cut sheets.
      B. Samples: As required for color selection or material thickness only.
      C. Shop Drawings: For custom applications, showing critical sizes and dimensions for installation and integration with other work. 

      1.4 DELIVERY, STORAGE AND HANDLING
      A. Unwrap and inspect planters after delivery for signs of damage during transit.
      B. Protect planters from damage during storage and handling.
      C. Store planters indoors if possible. Do not stand or walk on planters.
      D. Planter can be lifted by provided holes in corners of side wall structural supports. Lift only 6” off ground. Planter not to be loaded when mobilizing.

      1.5 PROJECT CONDITIONS
      A. Contractor to provide adequate structural support for planters. Unless otherwise specified, planters should have continuous basal support.
      B. Protect units from damage by adjacent work.

      1.6 WARRANTY
      A. Product will be free from defects in material and/or workmanship for a period of 3 years from invoice date
      B. Warranty does not apply to damages from alteration, misuse, or installation damage
      C. Normal use of these products may result in scratches, nicks, and dents. These are considered normal wear and tear, and are not the responsibility of the manufacturer
      D. Tournesol Siteworks will, at its option repair, replace, or refund the purchase price of products that are deemed defective by an authorized Tournesol Siteworks representative.

      2.0 PRODUCTS
      2.1 ACCEPTABLE PRODUCTS/MANUFACTURERS
      A. Wilshire Aluminum Planters, manufactured by Tournesol Siteworks LLC. 2930 Faber St., Union City, CA 94587 Tel: (800) 542-2282 FAX (510) 471-6243

      2.2 WILSHIRE ALUMINUM PLANTERS
      A. Materials -
      1. Aluminum – ASTM B209 – B5052-H32 Marine Grade 1/8” Aluminum sheet, formed and laser welded. Wall reinforcement elements of same material welded as required. The entire product is aluminum construction
      B. Construction –
      Planter bodies to be formed and fully laser welded at vertical seams. Top lips, where applicable, to be press broke, seam laser welded. Floor fully welded for a water-tight to body. Floor may be welded with 2” toe kick/reveal, or flush to bottom. Planters delivered with 1-5/8” drain holes unless specified otherwise.
      C. Performance characteristics –planter wall panels will not deform more than L/300 when loaded with 90 lbs/cu ft. soil media.
      D. Finish: specified finish; factory finished.
      1. Aluminum –
      a.: Following fabrication planter shall be cleaned by dry steam cleaning and zirconium solution. Corrosion-resistant zinc-free epoxy primer shall be applied, 1-2mils thick. Protective powder coat shall be polyester or polyester TGIC powder, minimum 4 mils thick. Following application parts shall be baked until properly cured.
      E. Sizes: Modular units fabricated to size by manufacturer as required to fill specified areas. Refer to catalog for standard sizes. Custom sizes as per approved shop drawings.

      2.3 PLANTER OPTIONS

      A. Drainage holes factory drilled as standard prior to delivery. Planters without drain holes need to be specified
      B. Scoop connections – adjacent planter walls may be lowered to allow multiple modular units appear to be one continuous unit. Optional connection kits also available, contact manufacturer prior to ordering
      C. Standard accessory pockets are available for standard lighting and junction boxes. Custom Accessory pockets available for audio, electrical, or other elements. Submit sample of specified housing with order, confirm size and location on shop drawings.
      D. Casters available for most small- and medium-sized planters, using polyurethane wheels. Non-locking casters recessed in planter, bottom of skirt approx.1/2” from surface.
      E. Cantilevered bench – Contact manufacturer for size and installation requirements

      3.0 EXECUTION

      3.1 PREPARATION
      A. Prior to planter fabrication, the contractor shall verify as-built dimensions of planter area or receptacles to ensure proper size, fit and quantity required.

      3.2 INSTALLATION
      A. Install planters to allow for easy removal if necessary. B. Provide continuous basal support. C. Install level to permit adequate drainage and irrigation.

    Teknik özellikler
    • Benzersiz ref.wilshire-planters-powder-coated-aluminum-rectangle-and-square
    • Ürün ailesiWilshire Collection
    • Ürün grubuWilshire Metal Planters
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2024-04-30
    • Baskı numarası1
    İlgili
    • Ana malzemeAlüminyum
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiPeyzaj - Peyzaj

    Bölge bulunurluk durumu

    Avrupa Kuzey Amerika Asya Güney Amerika
    Åland
    Anguilla
    Azerbaycan
    Arjantin
    Almanya
    Antigua ve Barbuda
    Bangladeş
    Bolivya
    Andorra
    Aruba
    Bhutan
    Brezilya
    Arnavutluk
    Bahamalar
    British Indian Ocean Territory
    Ekvador
    Avusturya
    Barbados
    Brunei Sultanlığı
    Falkland Adaları (Islas Malvinas)
    Belçika
    Belize
    Christmas Adası
    Fransız Guyanası
    Beyaz Rusya
    Bermuda
    Çin
    Guyana
    Bosna Hersek
    Birleşik Devletler
    Cocos Adaları
    Kolombiya
    Bulgaristan
    Caribbean Netherlands
    Endonezya
    Paraguay
    Cebelitarık
    Cayman Adaları
    Ermenistan
    Peru
    Çek Cumhuriyeti
    Curaçao
    Filipinler
    Şili
    Danimarka
    Dominik
    Güney Kore
    Surinam
    Estonya
    Dominik Cumhuriyeti
    Gürcistan
    Uruguay
    Faroe Adaları
    El Salvador
    Hindistan
    Venezuela
    Finlandiya
    Grenada
    Hong Kong
    Fransa
    Grönland
    Japonya
    Guernsey
    Guadeloupe
    Kamboçya
    Hırvatistan
    Guatemala
    Kazakistan
    Hollanda
    Haiti
    Kırgızistan
    İngiltere
    Honduras
    Kuzey Kore
    İrlanda
    İngiliz Virjin Adaları
    Laos
    Isle of Man
    Jamaika
    Macau
    İspanya
    Kanada
    Maldivler
    İsveç
    Kostarika
    Malezya
    İsviçre
    Küba
    Moğolistan
    İtalya
    Martinique
    Myanmar (Burma)
    İzlanda
    Meksika
    Nepal
    Jersey
    Montserrat
    Özbekistan
    Karadağ
    Nikaragua
    Pakistan
    Kıbrıs
    Panama
    Singapur
    Kuzey Makedonya
    Porto Riko
    Sri Lanka
    Letonya
    Saint Barthélemy
    Tacikistan
    Liechtenstein
    Saint Kitts ve Nevis
    Tayland
    Litvanya
    Saint Lucia
    Tayvan
    Lüksemburg
    Saint Martin
    Türkmenistan
    Macaristan
    Saint Pierre ve Miquelon
    Vietnam
    Malta
    Saint Vincent ve Grenadines
    Moldova
    Sint Maarten
    Monako
    Trinidad ve Tobago
    Norveç
    Turks ve Caicos Adaları
    Polonya
    Virjin Adaları
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan