Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Özellikler

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Teknik özellikler

Benzersiz ref.geofor
Ürün ailesiBed Joint Reinforcement
Ürün grubuGeofor
TipObje (Tekil Nesne)
Yayınlanma tarihi2017-05-08
Baskı numarası1

Bağlantılar

Ürün URL’sihttp://www.geohidrol.com/?products=geofor%C2%AE

İlgili

Ana malzemeÇelik
Tasarım yeriİspanya
Üretim yeriİspanya

Sınıflandırma

BIMobject kategorisiİnşaat Malzemeleri - Takviye
IFC sınıflandırmasıHasır Çelik
UNSPSC adıBricks
UNSPSC kodu301316
Uniclass 2015 koduSs_25_13_50
Uniclass 2015 açıklamasıMasonry wall systems
CSI MasterFormat 2014 kodu04 05 19.26
CSI MasterFormat 2014 başlığıMasonry Reinforcing Bars
OmniClass numarası23-13 21 21 11
OmniClass başlığıMasonry Reinforcing
CSI UniFormat II koduB2010
CSI UniFormat II başlığıExterior Walls

Bölge bulunurluk durumu

Avrupa
Åland
Almanya
Andorra
Arnavutluk
Avusturya
Belçika
Beyaz Rusya
Bosna Hersek
Bulgaristan
Cebelitarık
Çek Cumhuriyeti
Danimarka
Estonya
Faroe Adaları
Finlandiya
Fransa
Guernsey
Hırvatistan
Hollanda
İngiltere
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan