Concrete screw FBS II

Name: Concrete screw FBS II
Rating: 3.4 (7 reviews)

3.4(7 reviews)

The fischer concrete screw ULTRACUT FBS II US is a powerful anchoring solution with top installation comfort. The concrete screw with its pressed-on washer is ideal for slot fixations and the anchoring of wooden constructions as well as beams and sills. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial spacings.

Özellikler

- With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
- The special saw tooth geometry enables fast cutting into the concrete.
- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
- Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
- The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
- The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.

Teknik özellikler

Benzersiz ref.fischer-concrete-screw-fbs2
Ürün ailesiAnchors
Ürün grubuSteel fixings
TipObje (Tekil Nesne)
Yayınlanma tarihi2018-11-11
Baskı numarası1

Bağlantılar

İlgili

Ana malzemeGalvanize Çelik
Tasarım yeriAlmanya
Üretim yeriAlmanya

Sınıflandırma

BIMobject kategorisiYapı - Anchors & Fixings
IFC sınıflandırmasıYapı Elemanı Proksisi
ETIM KoduEC000048
ETIM AdıAnchor bolt
Uniclass 2015 koduPr_20_29_03_92
Uniclass 2015 açıklamasıUndercut anchors
CSI MasterFormat 2014 kodu05 05 19
CSI MasterFormat 2014 başlığıPost-Installed Concrete Anchors
OmniClass numarası23-13 23 11 15 13
OmniClass başlığıUndercut Anchors

Bölge bulunurluk durumu

Avrupa	Asya	Afrika
Åland	Afganistan	Mısır
Almanya	Bahreyn
Andorra	Birleşik Arap Emirlikleri
Arnavutluk	Filistin
Avusturya	Irak
Belçika	İran
Beyaz Rusya	İsrail
Bosna Hersek	Katar
Bulgaristan	Kuveyt
Cebelitarık	Lübnan
Çek Cumhuriyeti	Suriye
Danimarka	Suudi Arabistan
Estonya	Türkiye
Faroe Adaları	Umman
Finlandiya	Ürdün
Fransa	Yemen
Guernsey
Hırvatistan
Hollanda
İngiltere
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan