VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Özellikler

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Teknik özellikler

Benzersiz ref.VS-65-150-M
Ürün ailesiCirculators
Ürün grubuWet Rotor Electronic Circulators
TipObje (Tekil Nesne)
Yayınlanma tarihi2019-08-19
Baskı numarası1

Bağlantılar

Ürün URL’sihttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Kurulum talimatlarıhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Teknik açıklamahttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

İlgili

Ana malzemeBronze
İkincil malzemePlastik
Tasarım yeriİtalya
Üretim yeriİtalya

Sınıflandırma

BIMobject kategorisiSıhhi tesisat - Pompalar
UNSPSC adıCirculating pumps
UNSPSC kodu40151504
CSI MasterFormat 2014 kodu22 35 23
CSI MasterFormat 2014 başlığıCirculating, Domestic Water Heat Exchangers

Bölge bulunurluk durumu

Avrupa
Åland
Almanya
Andorra
Arnavutluk
Avusturya
Belçika
Beyaz Rusya
Bosna Hersek
Bulgaristan
Cebelitarık
Çek Cumhuriyeti
Danimarka
Estonya
Faroe Adaları
Finlandiya
Fransa
Guernsey
Hırvatistan
Hollanda
İngiltere
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan