EVOSTA 2/SAN

APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION FEATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Özellikler

TECHNICAL DATA Operating range: 0,4-3,6 m3/h with head up to 6,9 metres. Pumped liquid temperature range: from -10 °C to +110°C Working pressure: 10 bar (1000 kPa) Protection class: IPX5 Insulation class: F Installation: with horizontal motor axis Standard power input:: single-phase 1x230 V~ 50/60 Hz Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).

Teknik özellikler

Benzersiz ref.EVOSTA-2-SAN
Ürün ailesiCirculators
Ürün grubuWet Rotor Electronic Circulators
TipObje (Tekil Nesne)
Yayınlanma tarihi2018-03-11
Baskı numarası1

Bağlantılar

Ürün URL’sihttps://www.dabpumps.com/en/products/circulators/wet-rotor-electronic-circulators/evosta-2
Kurulum talimatlarıhttps://dabpumps.com/sites/default/files/qrcode_pdf/60187640_EVOSTA2-3-2SOL.pdf
Teknik açıklamahttps://www.dabpumps.com/sites/default/files/document/60187311_NEW%20EVOSTA%202-3_TS_ENG.pdf

İlgili

Ana malzemeCast iron
İkincil malzemePlastik
Tasarım yeriİtalya
Üretim yeriİtalya

Sınıflandırma

BIMobject kategorisiSıhhi tesisat - Pompalar
IFC sınıflandırmasıBoru Bağlantısı
ETIM KoduEC010980
ETIM AdıBuilt-in circulation pump
UNSPSC adıCirculating pumps
UNSPSC kodu40151504
Uniclass 2015 koduPr_65_53
Uniclass 2015 açıklamasıPump products
CSI MasterFormat 2014 kodu22 35 23
CSI MasterFormat 2014 başlığıCirculating, Domestic Water Heat Exchangers
OmniClass numarası23-27 17 00
OmniClass başlığıPumps
CSI UniFormat II koduD2020
CSI UniFormat II başlığıDomestic Water Distribution

Bölge bulunurluk durumu

Avrupa
Åland
Almanya
Andorra
Arnavutluk
Avusturya
Belçika
Beyaz Rusya
Bosna Hersek
Bulgaristan
Cebelitarık
Çek Cumhuriyeti
Danimarka
Estonya
Faroe Adaları
Finlandiya
Fransa
Guernsey
Hırvatistan
Hollanda
İngiltere
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan