Publiko produktet
ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier
ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier
    ARDEX

    ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

    ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

    Key Features

    • Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
    • For RH readings up to 100%
    • For absorbent concrete
    • No minimum profile required
    • No priming required prior to installation of ARDEX underlayments
    • Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
    • One-component system
    • Ready for use*, resealable and reusable
    • Easy to use and apply
    • Water-based, Zero VOC
    • ASTM E96 < .1 perms

    *As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

    Özellikler
    • Installation

      Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
      Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)

      Performance

      Effect of 14 pH Solution (ASTM D1308): No effect
      Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
      Install Underlayment: 1 – 24 hours
      VOC: 0 g/L
      Packaging: One 5 gal. (19 L) pail
      Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
      Shelf Life: 1 year, if unopened
      Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

      Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

    Teknik özellikler
    • Benzersiz ref.Ardex-vb-100
    • Ürün ailesiMoisture Control System
    • Ürün grubuOne Component Moisture Control System
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2024-02-21
    • Baskı numarası1
    İlgili
    • Ana malzemePolymer-modified cementitious
    Sınıflandırma
    • BIMobject kategorisiZemin Kaplama - Coatings & Coverings
    • IFC sınıflandırmasıFloor
    • UNSPSC adıFlooring
    • UNSPSC kodu301617
    • Uniclass 2015 koduEF_30_20
    • Uniclass 2015 açıklamasıFloors
    • CSI MasterFormat 2014 kodu09 60 00
    • CSI MasterFormat 2014 başlığıFlooring
    • OmniClass numarası23-15 17 11
    • OmniClass başlığıFlooring Specialties and Accessories
    • CSI UniFormat II koduC3020
    • CSI UniFormat II başlığıFloor Finishes

    Bölge bulunurluk durumu

    Kuzey Amerika
    Anguilla
    Antigua ve Barbuda
    Aruba
    Bahamalar
    Barbados
    Belize
    Bermuda
    Birleşik Devletler
    Caribbean Netherlands
    Cayman Adaları
    Curaçao
    Dominik
    Dominik Cumhuriyeti
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    İngiliz Virjin Adaları
    Jamaika
    Kanada
    Kostarika
    Küba
    Martinique
    Meksika
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Saint Barthélemy
    Saint Kitts ve Nevis
    Saint Lucia
    Saint Martin
    Saint Pierre ve Miquelon
    Saint Vincent ve Grenadines
    Sint Maarten
    Trinidad ve Tobago
    Turks ve Caicos Adaları
    Virjin Adaları