Publiko produktet
ARDEX ERM - Exterior Ramp Mortar
ARDEX ERM - Exterior Ramp Mortar
    ARDEX

    ARDEX ERM - Exterior Ramp Mortar

    ARDEX ERM™ Exterior Ramp Mortar is a trowel-grade, polymer-modified Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. It has a corrosion inhibitor built-in to protect reinforcing steel. Key Features Integral corrosion inhibitor Easy to apply Mixes with water only Installs from 1/4” – 2” (6 mm – 5.1 cm) neat and up to 8” (20.3 cm) when extended with aggregate Freeze-thaw resistant Suitable for normal service commercial, institutional and multi-unit residential applications Use for exterior and interior concrete repair
    Özellikler
    • Installation
      Mixing Ratio: 6 1/2 pints (3.08 L) of water per 55 lb. (25 kg) bag
      Coverage: 0.46 cu. ft. per 55 lb. bag (0.01 m3 per 25 kg bag); 22 sq. ft. per 55 lb. bag at 1/4”; (2.04 m2 per 25 kg bag at 6 mm)

      Performance
      Compressive Strength (ASTM C109): 7 days 7000 psi; 490 kg/sq. cm; 28 days 8200 psi; 574.0 kg/sq. cm
      Flexural Strength (ASTM C293): 7 days 1200 psi; 84 kg/sq. cm; 28 days 1500 psi; 105 kg/sq. cm
      Modulus of Elasticity ASTM C469): 28 days 3.67 x 106 psi; 2.6 x 105 kg/sq. cm
      Length Change (ASTM C157): 7 days 0.06%; 28 days 0.08%
      Rapid Chloride Permeability (ASTM C1202, 28 days): 820 coulombs
      Pot Life / Working Time: 25 – 45 minutes
      Time to Traffic: Light foot 2 – 4 hours; Normal foot 3 days; Full, including rolling loads 5 – 7 days
      Coat or Seal (Minimum): 3 – 7 days
      Color: Gray
      Packaging: 55 lb. (25 kg) bag
      Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
      Shelf Life: 1 year, if unopened.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Teknik özellikler
    • Benzersiz ref.ARDEX-ERM
    • Ürün ailesiConcrete Repair
    • Ürün grubuExterior Ramp Mortar
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2019-11-07
    • Baskı numarası1
    İlgili
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiİnşaat Malzemeleri - Beton
    • UNSPSC adıInterior finishing materials
    • UNSPSC kodu3016
    • CSI MasterFormat 2014 kodu09 93 23.53
    • CSI MasterFormat 2014 başlığıInterior Finishing
    • OmniClass numarası23-15 00 00
    • OmniClass başlığıInterior and Finish Products
    • CSI UniFormat II koduC30
    • CSI UniFormat II başlığıINTERIOR FINISHES

    Bölge bulunurluk durumu

    Kuzey Amerika
    Anguilla
    Antigua ve Barbuda
    Aruba
    Bahamalar
    Barbados
    Belize
    Bermuda
    Birleşik Devletler
    Caribbean Netherlands
    Cayman Adaları
    Curaçao
    Dominik
    Dominik Cumhuriyeti
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    İngiliz Virjin Adaları
    Jamaika
    Kanada
    Kostarika
    Küba
    Martinique
    Meksika
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Saint Barthélemy
    Saint Kitts ve Nevis
    Saint Lucia
    Saint Martin
    Saint Pierre ve Miquelon
    Saint Vincent ve Grenadines
    Sint Maarten
    Trinidad ve Tobago
    Turks ve Caicos Adaları
    Virjin Adaları