SOUNDBREAK® XP® - SoundBreak XP Acoustically Enhanced Gypsum Board

SOUNDBREAK® XP®
SoundBreak XP Acoustically Enhanced Gypsum Board

Superior Sound Damping
Acoustical Enhanced for High Rated STC Wall Assemblies
Mold/Mildew/Moisture Resistant
Approved For Use on Walls and Ceilings

Soundbreak XP Gypsum Board is an acoustically enhanced gypsum board used in the construction of high STC wall assemblies. This innovative gypsum board allows for construction of high STC wall assemblies that are thinner, cost effective and more reliable than traditional methods for constructing these types of assemblies.

SoundBreak XP Gypsum Board has an acoustically enhanced, high density gypsum core encased in a heavy, abrasion and mold/mildew/moisture resistant, 100% recycled, purple paper on both sides. Used in construction of high rated STC wall assemblies, SoundBreak XP consists of a layer of viscoelastic damping polymer sandwiched between two pieces of high density mold resistant gypsum board, providing constrained layer damping.

FEATURES/BENEFITS

Resists the growth of mold per ASTM G 21 with a score of 0, the best possible score.
Resists the growth of mold per ASTM D 3272 with a score of 10, the best possible score.
Use of SoundBreak XP Gypsum Board results in wall partitions with high rated STC values that are thinner than traditionally built high rated STC wall partitions providing increased usable floor space.
Superior sound damping, cost-efficient material that is easily finished and decorated in the same manner as standard gypsum board.
All SoundBreak XP Gypsum Board designs were tested by an independent third-party acoustical laboratory using the full-scale ASTM E90 test procedure.
Heavy abrasion resistant paper and denser core provide greater resistance to surface abuse and indentation when tested in accordance with ASTM C 1629.
Features a smooth, heavy face paper that is highly resistant to scuffing and provides a superior surface for decoration.
5/8" SoundBreak XP features a fire resistant Type X core and is UL Classified and approved for inclusion in specific UL fire-rated designs.
SoundBreak XP Gypsum Board is GREENGUARD Children & SchoolsSM Certified for indoor air quality.
Approved for use on walls and ceilings.

LIMITATIONS

Exposure to excessive or continuous moisture and extreme temperatures should be avoided. SoundBreak XP Gypsum Board is not recommended where it will be exposed to temperatures exceeding 125°F (52°C) for extended periods of time.
Installing SoundBreak XP Gypsum Board panels over an insulating blanket, installed continuously across the face of the framing members, is not recommended. Blankets should be recessed and flanges attached to the sides of the studs.
SoundBreak XP Gypsum Board must be stored off the ground and under cover. Sufficient risers must be used to ensure support for the entire length of the gypsum board to prevent sagging.
SoundBreak XP Gypsum Board must be kept dry to minimize the potential for mold growth. Adequate care should be taken while transporting, storing, applying and maintaining SoundBreak XP Gypsum Board. For additional information, refer to the Gypsum Association publication, “Guidelines for the Prevention of Mold Growth on Gypsum Board” (GA-238-03), which is available at gypsum.org under the “Download Free Gypsum Association Publications” section.

ACCESSORIES

Fasteners: Drywall Screws or Nails
Joint Tape
Joint Compound
Cornerbead
Trims
Casing Beads
Acoustical Sealant
Acoustical Putty Pads

Teknik özellikler

Benzersiz ref.acoustical-surfaces-soundbreak-xp
Ürün ailesiConstruction
Ürün grubuCeiling Specialties and Accessories
TipObje (Tekil Nesne)
Yayınlanma tarihi2013-06-18
Baskı numarası1

Bağlantılar

Ürün URL’sihttp://www.acousticalsurfaces.com/soundbreak/soundbreak.htm?d=14

Sınıflandırma

BIMobject kategorisiYapı - Tavan
IFC sınıflandırmasıTavan
Uniclass 2015 koduSs_30_36
Uniclass 2015 açıklamasıCeiling and soffit opening systems
CSI MasterFormat 2014 kodu09 54 00
CSI MasterFormat 2014 başlığıSpecialty Ceilings
OmniClass numarası23-15 19 23
OmniClass başlığıCeilings
CSI UniFormat II koduC3030
CSI UniFormat II başlığıCeiling Finishes

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları