Flanged Branch 45°

Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

Our Flanged Branches (sometimes called “wyes” or “laterals”) are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections.

45º branch item numbers below, available with 30° angle
When ordering, specify A, B, C.A – C ≥ C – B
Use the following formula to determine length: L = C X 2 + 15"
Use formula above to determine if a reducer is needed at C end.
Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
Available with QF ends in diameters up to 24", flanged diameters up to 72", and other end types
Optional gauges 18, 16, 14, 12 and 10
Flange gaskets available

Contact Nordfab or your local Nordfab dealer for assistance with branch configurations, optional end types, larger sizes, and material / gauge options.

สเปคสินค้า

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.

สเปคสินค้าด้านเทคนิค

Unique ref.us-flanged-branch-45-degree
Product familyFlanged Ducting
กลุ่มผลิตภัณฑ์Branches
ประเภทวัตถุ (วัตถุชิ้นเดียว)
วันที่เผยเเพร่2024-05-08
หมายเลขฉบับ1

ลิงค์

Product urlhttps://www.nordfab.com/en-us/products/fb-ducting/branches/us-flanged-branch-45-degree
ข้อมูลด้านเทคนิคhttps://www.nordfab.com/-/media/files/nordfab/americas/americas-product-data-sheets/nordfab_standard_branch.pdf

สิ่งที่เกี่ยวข้อง

วัสดุหลักGalvanized steel
วัสดุรองStainless steel 304
ออกเเบบโดยสหรัฐอเมริกา
ผลิตโดยสหรัฐอเมริกา

การจำแนกประเภท

หมวดหมู่ BIMobjectงานระบบ (HVAC) - Dust Collection
IFC classificationDuct Fitting
ETIM CodeEG015540
ETIM NameFittings, flanges and connectors
Uniclass 2015 CodePr_65_65_25
Uniclass 2015 DescriptionDuctwork and fittings
CSI MasterFormat 2014 Code23 31 13.19
CSI MasterFormat 2014 TitleMetal Duct Fittings
OmniClass Number23-33 49 00
OmniClass TitleHVAC Ductwork

พื้นที่การขาย

อเมริกาเหนือ
คอสตาริกา
แคนาดา
แซงมาร์แตง
เบลีซ
เบอร์มิวดา
ปานามา
เปอร์โตริโก
เม็กซิโก
สหรัฐอเมริกา
หมู่เกาะบริติชเวอร์จิน