Flanged Pipe

Nordfab® Flanged Duct Pipe is for use in dust collections systems when the pipe size must be greater than 24″ diameter or when flanged connections are required.

The rotational industry-standard Angle Flanges on our Flanged Pipes are retained by Van Stone lips on the pipe ends. Pipe length is nominally 5′.

Angle Flange Gaskets available.
Use with our Angle Flange Adapter for quick connections to QF Pipe and fittings.
Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
Available with QF ends in diameters up to 24", and with other end types including flanges with custom bolt hole patterns
Other material gauges include 18, 16, 14, 12 and 10

Contact Nordfab or your local Nordfab dealer for assistance with optional end types, larger sizes, and material / gauge options.

สเปคสินค้า

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.

สเปคสินค้าด้านเทคนิค

Unique ref.flanged-pipe
Product familyFlanged Ducting
กลุ่มผลิตภัณฑ์Pipes & Flanges
ประเภทวัตถุ (วัตถุชิ้นเดียว)
วันที่เผยเเพร่2024-05-09
หมายเลขฉบับ1

ลิงค์

Product urlhttps://www.nordfab.com/en-us/products/fb-ducting/pipe-and-flanges/flanged-pipe
ข้อมูลด้านเทคนิคhttps://www.nordfab.com/-/media/files/nordfab/americas/americas-product-data-sheets/nordfab_duct_pipe.pdf

สิ่งที่เกี่ยวข้อง

วัสดุหลักGalvanized steel
วัสดุรองStainless steel 304
ออกเเบบโดยสหรัฐอเมริกา
ผลิตโดยสหรัฐอเมริกา

การจำแนกประเภท

หมวดหมู่ BIMobjectงานระบบ (HVAC) - Dust Collection
IFC classificationDuct Fitting
ETIM CodeEG015540
ETIM NameFittings, flanges and connectors
Uniclass 2015 CodePr_65_65_25
Uniclass 2015 DescriptionDuctwork and fittings
CSI MasterFormat 2014 Code23 31 13.19
CSI MasterFormat 2014 TitleMetal Duct Fittings
OmniClass Number23-33 49 00
OmniClass TitleHVAC Ductwork

พื้นที่การขาย

อเมริกาเหนือ
คอสตาริกา
แคนาดา
แซงมาร์แตง
เบลีซ
เบอร์มิวดา
ปานามา
เปอร์โตริโก
เม็กซิโก
สหรัฐอเมริกา
หมู่เกาะบริติชเวอร์จิน