Redi-Roof Standing Seam metal roof panel

Redi-Roof Standing Seam metal roof panel

4.6 av 5 stjärnor4.6(5 omdömen)
Features
  • Available with or without offsets
  • Factory eave notching available
  • Herr-Voss corrective leveled
  • Labor-saving one-piece design
  • Stiffener beads available
  • 30-year non-prorated finish warranty
  • Panel lengths up to 45’

Redi-Roof may be specified in either a batten or standing-seam profile and is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are factory roll-formed in continuous lengths. Maximum panel length is 45’ and minimum panel length is 4’.

Trim

Redi-Roof may be specified in either a batten or standing-seam profile and is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are factory roll-formed in continuous lengths. Maximum panel length is 45’ and minimum panel length is 4’.

Redi-Roof panels feature an offset profile which adds strength and allows room for a hex head fastener. The clip, with its button-punched design, ensures an extra-snug fit. The one-piece design allows for ease of installation.

Installation

Redi-Roof panels shall be installed over solid decking with an underlayment of 30# (min.) roofing felt applied horizontally from eave to ridge. Panels shall be fastened using Petersen Aluminum nonpenetrating clips, fastening on 18” centers (max.). Minimum slope at 3:12 pitch. Redi-Roof batten panels cannot be lapped in the field. Consult a local architect/engineer for requirements of local codes and conditions.

Teknisk specifikation
  • Unik ref.roof-panel-pac-clad-redi-roof-standing-seam
  • ProduktfamiljRoof Panels
  • ProduktgruppRoof Panels
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2015-06-09
  • Edition nummer1
Relaterad
  • Designad iUSA
  • Tillverkad iUSA
Klassificering
  • BIMobjektkategoriKonstruktion - Tak
  • IFC klassificeringTak
  • UNSPSC namnRoofing materials
  • UNSPSC kod301515
  • Uniclass 2015 kodPr_25_93_72
  • Uniclass 2015 beskrivningRoofing and cladding units
  • CSI MasterFormat 2014 Kod07 40 00
  • CSI MasterFormat 2014 TitelRoofing and Siding Panels
  • OmniClass nummer23-13 39 27
  • OmniClass TitelRoof Cladding

Region tillgänglighet

Nordamerika
USA