Neva 1.0 - Outside Lighting

Linear profile for outdoor applications

walkover
surface mounted (ceiling, wall, floor) with brackets or recessed (ceiling, floor, wall) with outer casing
Power: 18W, 25W
Power supply: 24Vdc
Lumen output at source: 2065 lm (3000K, 25W), 1392 lm (3000K, 18W)
Delivered lumen output: 1610 lm (3000K, 30°, 25W), 1150 lm (3000K, 30°, 18W)
10 power LEDs pitch 60 mm, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 11°, 30°, 45°, 10°x40°: optical system composed of a series of equidistant light sources, 60 mm apart. The deep-set TIR lens guarantees high-quality light emission and visual comfort
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized grey (20 micron) to give the product better heat dissipation and increase its resistance to corrosion. Caps made of glass-fibre-reinforced polyamide for greater resistance.
Screen material: 4-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches.
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,75 Ø6,3 mm
Ingress protection: IP67
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: III
Weight: 1150 g
Dimensions: 616x37x29mm
Energy efficiency class: A / A+ / A++
Accessories: WB6510 Anti-glare shield in black-painted stainless steel - 612 mm, WC6510 Aluminium outer casing - 622 mm, WC6710 Aluminium outer casing for plasterboard - 622 mm, WF6405 Neoprene cable - 5 m  H05RN-F 2x0,75 Ø6,3 mm, WF6410 Neoprene cable - 10 m  H05RN-F 2x0,75 Ø6,3 mm, WF6415 Neoprene cable - 15 m  H05RN-F 2x0,75 Ø6,3 mm, WF6420 Neoprene cable - 20 m  H05RN-F 2x0,75 Ø6,3 mm, WH6010 Honeycomb louvre , WM0601 Pair of brackets h 75 mm, WM0602 Pair of brackets h 140 mm, WN6001 Anti-fall kit, WN6004 Pair of extractors for outer casings, WN6005 Alignment kit for outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption