i250 Commercial Tankless System - Wall Hung

i250 Commercial Tankless System - Wall Hung

Commercial Tankless on-demand water heater

KEY FEATURES

• Stainless (316L) Heat Exchanger
• Flexible-Floating Design, stress-relieving and thermal shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Specifikation

Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
Thermal Efficiency 92%
Energy Factor N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent (2” not allowed at elevations above 4,000 ft) N/A
Max 2” Vent Length - Two Pipe / Direct Vent (2” not allowed at elevations above 4,000 ft) N/A
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Teknisk specifikation

Unik ref.i250
Produktfamilji Series
ProduktgruppCommercial Tankless System - Wall Hung
TypObjekt (enstaka objekt)
Publiceringsdatum2020-05-11
Edition nummer1

Länkar

Produkt-urlhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i250-i-series/
Installationsinstruktionerhttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Produktcertifieringhttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Teknisk beskrivninghttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii

Relaterad

HuvudmaterialStål
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriVVS - Varmvattenberedare
IFC klassificeringVärmeväxlare
ETIM kodEC000392
ETIM namnInstantaneous water heater
UNSPSC namnCommercial water heaters
UNSPSC kod40101826
Uniclass 2015 kodPr_60_60_96
Uniclass 2015 beskrivningWater heaters
CSI MasterFormat 2014 Kod23 00 00
CSI MasterFormat 2014 TitelHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass nummer23-31 29 11
OmniClass TitelInstantaneous Hot Water Heaters
CSI UniFormat II KodD3090
CSI UniFormat II TitelOther HVAC Systems & Equipment

Region tillgänglighet

Nordamerika	Sydamerika
Amerikanska Jungruöarna	Guyana
Anguilla	Surinam
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
British Virgin Islands
Caymanöarna
Curaçao
Dominica
Dominikanska republiken
Grenada
Guadeloupe
Haiti
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Montserrat
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA