Manually operated tailboard for fitting in front of the hall opening with side brackets to hold buffers. Self-supporting steel articulated design in accordance with EN 1398.
Note on use of bullet points:
• for standard equipment to choose
- for optional equipment
Steel construction, welded, rear mounting plate, platform with reinforcement profiles on the underside.
Platform made of moulded, anti-slip steel (running plate S355), 12/14 mm thick.
Platform with inclination.
Operation via a control bar with chain.
Hörmann mechanical tailboard MRF
Manually operated tailboard for fitting in front of the hall opening with side brackets to hold buffers. Self-supporting steel articulated design in accordance with EN 1398.
Note on use of bullet points:
• for standard equipment to choose
- for optional equipment
Steel construction, welded, rear mounting plate, platform with reinforcement profiles on the underside.
Platform made of moulded, anti-slip steel (running plate S355), 12/14 mm thick.
Platform with inclination.
Operation via a control bar with chain.
Counterbalance via gas springs.
Ordering width:
• 1250 mm, rated load 38 kN acc. to EN 1398
• 1500 mm, rated load 45 kN acc. to EN 1398
• 1750 mm, rated load 54 kN acc. to EN 1398
• 2000 mm, rated load 60 kN acc. to EN 1398
• 2250 mm, rated load 60 kN acc. to EN 1398
Note: To avoid lane grooves in the platform when using industrial trucks with (hard) PU / Vulkollan rollers: restriction of total weight recommended for reach lift trucks to max. 3 t, for industrial trucks max. 5 t at nominal load ≥ 50 kN. This information does not change the rated load!
Levelling +85 mm / -124 mm
Application areas: Logistics, commercial halls, industrial halls, warehouses, in front of the hall
