• Standard equipment to choose
- Optional extras
Ordering width:
• 2000 mm
• 2100 mm
• 2250 mm
Ordering length (dock leveller installation height):
• 2000 mm (650 mm)
• 2500 mm (650 mm)
• 2750 mm (650 mm)
• 3000 mm (650 mm)
Ramp width: 3500 mm
Ramp height: … mm
(875 to 1360, for angled arrangement at least 977)
Note: Ramp height measured from the top edge of the platform (not top edge of running plate) to the bottom edge of the base on the front side. Note the required slope of 1% (for drainage) from the outer wall of the building!
Dock leveller levelling dependent on ordering length and means of transport.
In accordance with EN 1398, a max. slope of 12.5% (approx. 7°) is permissible for all industrial truck types.
Design:
Dock leveller with torsional flexibility, platform with reinforcement profiles at the bottom side, electrohydraulic system with 2 main cylinders, welded steel frame
Steel construction with adjustable pedestal feet, side elements can be loaded with 1000 kN/m²
• Front side pre-drilled for fastening buffers
- Front side pre-drilled for fastening buffers, safety equipment and optional extras such as docking assistance DAP, manoeuvring guide Light Guide LG, DAS support brackets, lorry safety harnesses from the forwarder
• Carrying capacity: Rated load 60 kN acc. to EN 1398
Note: Restriction of total weight of industrial trucks with PU/Vulkollan rollers recommended to prevent lane grooves in the platform: With platform 6/8 mm for reach lift trucks max. 3 t, for industrial trucks max. 5 t; with platform 8/10 mm for reach lift trucks max. 5 t, for industrial trucks max. 6 t. This figure does not change the rated load!
Platform
made of moulded, anti-slip steel (running plate S235).
Platform material thickness:
• 6/8 mm
- 8/10 mm
Lip
made of moulded, anti-slip steel (running plate S355).
Application areas: Logistics, commercial halls, industrial halls, warehouses, in front of the hall
(5 omdömen)
