Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Specifikation

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Teknisk specifikation

Unik ref.geofor
ProduktfamiljBed Joint Reinforcement
ProduktgruppGeofor
TypObjekt (enstaka objekt)
Publiceringsdatum2017-05-08
Edition nummer1

Länkar

Produkt-urlhttp://www.geohidrol.com/?products=geofor%C2%AE

Relaterad

HuvudmaterialStål
Designad iSpanien
Tillverkad iSpanien

Klassificering

BIMobjektkategoriByggnadsmaterial - Armering
IFC klassificeringArmeringsnät
UNSPSC namnBricks
UNSPSC kod301316
Uniclass 2015 kodSs_25_13_50
Uniclass 2015 beskrivningMasonry wall systems
CSI MasterFormat 2014 Kod04 05 19.26
CSI MasterFormat 2014 TitelMasonry Reinforcing Bars
OmniClass nummer23-13 21 21 11
OmniClass TitelMasonry Reinforcing
CSI UniFormat II KodB2010
CSI UniFormat II TitelExterior Walls

Region tillgänglighet

Europa
Åland
Albanien
Andorra
Belgien
Bosnien och Hercegovina
Bulgarien
Cypern
Danmark
Estland
Färöarna
Finland
Frankrike
Gibraltar
Grekland
Guernsey
Irland
Island
Isle of Man
Italien
Jersey
Kroatien
Lettland
Liechtenstein
Litauen
Luxemburg
Malta
Moldavien
Monaco
Montenegro
Nederländerna
Nordmakedonien
Norge
Österrike
Polen
Portugal
Rumänien
Ryssland
San Marino
Schweiz
Serbien
Slovakien
Slovenien
Spanien
Storbritannien
Svalbard
Sverige
Tjeckien
Tyskland
Ukraina
Ungern
Vatikanstaten
Vitryssland