VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Specifikation

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Teknisk specifikation

Unik ref.VS-65-150-M
ProduktfamiljCirculators
ProduktgruppWet Rotor Electronic Circulators
TypObjekt (enstaka objekt)
Publiceringsdatum2019-08-19
Edition nummer1

Länkar

Produkt-urlhttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Installationsinstruktionerhttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Teknisk beskrivninghttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Relaterad

HuvudmaterialBronze
Sekundärt materialPlast
Designad iItalien
Tillverkad iItalien

Klassificering

BIMobjektkategoriRörläggning - Pumpar
UNSPSC namnCirculating pumps
UNSPSC kod40151504
CSI MasterFormat 2014 Kod22 35 23
CSI MasterFormat 2014 TitelCirculating, Domestic Water Heat Exchangers

Region tillgänglighet

Europa
Åland
Albanien
Andorra
Belgien
Bosnien och Hercegovina
Bulgarien
Cypern
Danmark
Estland
Färöarna
Finland
Frankrike
Gibraltar
Grekland
Guernsey
Irland
Island
Isle of Man
Italien
Jersey
Kroatien
Lettland
Liechtenstein
Litauen
Luxemburg
Malta
Moldavien
Monaco
Montenegro
Nederländerna
Nordmakedonien
Norge
Österrike
Polen
Portugal
Rumänien
Ryssland
San Marino
Schweiz
Serbien
Slovakien
Slovenien
Spanien
Storbritannien
Svalbard
Sverige
Tjeckien
Tyskland
Ukraina
Ungern
Vatikanstaten
Vitryssland