EVOSTA 2/SAN

APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION FEATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Specifikation

TECHNICAL DATA Operating range: 0,4-3,6 m3/h with head up to 6,9 metres. Pumped liquid temperature range: from -10 °C to +110°C Working pressure: 10 bar (1000 kPa) Protection class: IPX5 Insulation class: F Installation: with horizontal motor axis Standard power input:: single-phase 1x230 V~ 50/60 Hz Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).

Teknisk specifikation

Unik ref.EVOSTA-2-SAN
ProduktfamiljCirculators
ProduktgruppWet Rotor Electronic Circulators
TypObjekt (enstaka objekt)
Publiceringsdatum2018-03-11
Edition nummer1

Länkar

Produkt-urlhttps://www.dabpumps.com/en/products/circulators/wet-rotor-electronic-circulators/evosta-2
Installationsinstruktionerhttps://dabpumps.com/sites/default/files/qrcode_pdf/60187640_EVOSTA2-3-2SOL.pdf
Teknisk beskrivninghttps://www.dabpumps.com/sites/default/files/document/60187311_NEW%20EVOSTA%202-3_TS_ENG.pdf

Relaterad

HuvudmaterialCast iron
Sekundärt materialPlast
Designad iItalien
Tillverkad iItalien

Klassificering

BIMobjektkategoriRörläggning - Pumpar
IFC klassificeringRörkoppling
ETIM kodEC010980
ETIM namnBuilt-in circulation pump
UNSPSC namnCirculating pumps
UNSPSC kod40151504
Uniclass 2015 kodPr_65_53
Uniclass 2015 beskrivningPump products
CSI MasterFormat 2014 Kod22 35 23
CSI MasterFormat 2014 TitelCirculating, Domestic Water Heat Exchangers
OmniClass nummer23-27 17 00
OmniClass TitelPumps
CSI UniFormat II KodD2020
CSI UniFormat II TitelDomestic Water Distribution

Region tillgänglighet

Europa
Åland
Albanien
Andorra
Belgien
Bosnien och Hercegovina
Bulgarien
Cypern
Danmark
Estland
Färöarna
Finland
Frankrike
Gibraltar
Grekland
Guernsey
Irland
Island
Isle of Man
Italien
Jersey
Kroatien
Lettland
Liechtenstein
Litauen
Luxemburg
Malta
Moldavien
Monaco
Montenegro
Nederländerna
Nordmakedonien
Norge
Österrike
Polen
Portugal
Rumänien
Ryssland
San Marino
Schweiz
Serbien
Slovakien
Slovenien
Spanien
Storbritannien
Svalbard
Sverige
Tjeckien
Tyskland
Ukraina
Ungern
Vatikanstaten
Vitryssland