TrenchFormer ® TFX
ABT, Inc.

TrenchFormer ® TFX

TrenchFormer  6″- 24″

TrenchFormer is a pre-engineered, cast-in-place concrete forming system for forming surface drainage trenches, catch basins, utility chases, and voids in concrete placements. The system includes expanded polystyrene (EPS) form profiles, steel inlay rails, patented no-float legs, grates, and grate retainers. TrenchFormer is available in various width, depths, slopes and trench bottom configurations. TrenchFormer replaces hand-forming, heavy materials, keyways and waterstops normally required with trench drains and utility chases.
Its components are made in the most commonly constructed sizes. TrenchFormer consists of 8 ft. (2.4 M ) pre-sloped form segments.  Former sections are available in a variety of slopes.
The segments have integral deforming grooves for easy removal and full length longitudinal grooves for coplanar rail spacing.
The steel components are angle rails with anchoring studs welded on 11 in. (280 mm) centers to the outside corners. 1/2 in. (12.7 mm) threaded U-shaped no-float legs attach to horizontal tabs on each rail. Each rail end is designed to accept a Rail Alignment Clip which retains adjacent rail segments.
Prefabricated L-rail and T-rail assemblies allow for field installation of 90° turns anywhere in the pre-sloped layout.  These assemblies have rail reinforcement built into the areas where the grates are unsupported in other systems. This reinforcement provides load capacity for AASHTO H2O load ratings.
Outlet piping is butted to an annular groove made in the EPS form prior to concreting. For trench junctions or for large outlet sizes, four catch basins are provided. A selection of gratings and solid covers is available for various loadings.

Teknisk specifikation
  • Unik ref.trenchformer-tfx
  • ProduktfamiljCast in Place Trench Drain
  • ProduktgruppTrenchformer TFX
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2020-06-26
  • Edition nummer1
Relaterad
  • HuvudmaterialStål
  • Sekundärt materialPolystyren (EPS)
  • Designad iUSA
  • Tillverkad iUSA
Klassificering
  • BIMobjektkategoriRörläggning - Dränering
  • Uniclass 2015 kodPr_65_52_24_24
  • Uniclass 2015 beskrivningDrainage channels with gratings
  • CSI MasterFormat 2014 Kod33 46 00
  • CSI MasterFormat 2014 TitelSubdrainage
  • OmniClass nummer23-39 29 11
  • OmniClass TitelWaste Water Drains
  • CSI UniFormat II KodD2040
  • CSI UniFormat II TitelRain Water Drainage

Region tillgänglighet

Nordamerika
Amerikanska Jungruöarna
Anguilla
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
British Virgin Islands
Caymanöarna
Costa Rica
Curaçao
Dominica
Dominikanska republiken
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Saint-Pierre-et-Miquelon
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA