Rolling Steel Fire Doors FireStar® Model 700

Rolling Steel Fire Doors FireStar® Model 700

Our FireStar® Model 700 Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar® doors can be drop-tested and reset at any time by anyone, thanks to a standard auto-reset feature. This rolling steel fire door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

The revolutionary FireStar® design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. Factory-tested and approved for a minimum of 20,000 cycles, the FireStar® door can be used and tested on a regular basis without concerns of premature failure. Our rolling steel fire doors have been tested and approved to meet the requirements of well-known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

We incorporate one standardized component design for all FireStar®* doors regardless of size, and utilize fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future.

*Doors up to 24’x24’

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Specifikim
  • Key Product Features

    • Max Height: 24’ (7,315.2 mm)
    • Max Width: 24’ (7,7315.2 mm)
    • Max Square Foot: 324 sq. ft.
    • Material: Galvanized or Stainless Steel
    • Curtain: Interlocking roll-formed slats with alternate slats fitted with metal endlocks / windlocks
    • Operation: Lift-up standard. Chain hoist included on sizes that require it
    • Bottom Bar: Two equal angles, 0.121" min thickness, to stiffen curtain
    • Brackets: Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearing
    • Counter Balance: Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe 20,000 cycle
    • Hood: Minimum 24-gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide lonitudinal stiffness
    • Finish: Rust inhibitive primer or non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint.
    • Operator Options: Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge
    • Release Mechanism: FireStar release mechanism standard on doors up to 24' x 24'
    • Mounting: Structural drive, drywall over wood stud jamb, drywall over 16-gauge steel stud jamb.

    *Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge.

    FireStar Door Control Devices

    Chain hoist, motor and crank operation

    • Revolutionary fire door control device utilizing a patented planetary gear arrangement to disconnect the operator and drop the door in the event of a fire
    • Easy drop test and reset a fire door without resetting spring tension and rerouting cables.

    Lift up operation

    • Revolutionary fire door control device utilizing a clutch plates and unique counterbalance technology to drop the door in the event of a fire.

    Slat Profiles

    No. 2 - Standard: Curved-faced single crown slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.9'

    No. 4 - Standard: Curved-faced single crown slat. Available: Up to 18-gauge steel Up to 20-gauge stainless steel Pitch: 2.8'

    No. 14 - Standard: Flat-faced slat. Available: Up to 18-gauge steel Up to 18-gauge stainless steel Pitch: 2.45'

    No. 17 - Standard: Flat-faced slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.6'

    Warranty: 2 year limited

Specifikime teknike
  • Referencë unikerolling-steel-fire-doors-firestar-model-700
  • Familja e produkteveCommercial Doors
  • Grupi i produkteveRolling Doors
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2024-04-25
  • Numri i botimit1
Të ngjashme
  • Materiali kryesorÇelik
  • Projektuar nëShtetet e Bashkuara
  • Prodhuar nëShtetet e Bashkuara
Klasifikimi
  • Kategoria BIMobjectDyert - Dyer zjarri & Kapakë
  • IFC classificationDerë
  • CSI MasterFormat 2014 Code08 33 23
  • CSI MasterFormat 2014 TitleOverhead Coiling Doors
  • OmniClass Number23-17 11 31 11 13
  • OmniClass TitleFire Rated Rolling Doors

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika