Publiko produktet
Protan BlueProof water attenuation system on concrete substrate
Protan BlueProof water attenuation system on concrete substrate
Protan BlueProof water attenuation system on concrete substrate
PROTAN

Protan BlueProof water attenuation system on concrete substrate

PROTAN BLUEPROOF WATER ATTENUATION SYSTEM ON CONCRETE SUBSTRATE

Protan BlueProof is a new and SINTEF-approved (TG 20541) water attenuation system for new and existing roofs (also known as a blue roof). Protan BlueProof expands the function of the roof and helps prevent floods and water damage.

With this system, water is gradually drained and allowed into the storm drain network, avoiding overloading resulting in floods. The system not only solves current problems with storm floods, but also those of the future. Protan can calculate the predicted volumes of water for roofs in specific locations during storm events. Water loads can then be taken into account at an early stage during the building’s construction, ensuring the roof’s structure can retain the calculated water.
This is often cheaper than utilising other methods of water attenuation.

Protan BlueProof combines a trusted waterproofing system and a water attenuation system in one. Thus keeping a building’s contents secure whilst reducing the effects of flooding on the surrounding environment.

Water attenuation calculations are carried out by Protan and are based on the project's location, local authority requirements and the roof's design. Roof slopes can be reduced to 1:100 fall to provide the optimum water attenuation as well as a lower roof profile.

Quality assurance of installation
A Protan BlueProof Roofing System shall always be calculated and planned in detail by Protan AS. The roofing system must be installed by roofing contractors specially approved by Protan AS. Their roofers must have passed "Roofing school" (a certificate containing the relevant basic education in Protan's roofing handbook) and attended Protan BlueProof roofing training.

All roofs must be undertaken visual inspection done by a person especially appointed by Protan. During the inspection focus shall lie on good melt out along all welding joints on the roof area as well as around details and endings. 

After completing the roof installation, a water flood / pressure test of the roof area has to be carried out, alternatively, verification using electronic leak testing.

Maintenance
For Protan BlueProof annual inspection is required to be in front of possible damages. All Protan BlueProof roofs require a maintenance agreement with the building owner. This will ensure qualified inspection and maintenance of the roof and its components up to two times a year during the roofs lifetime.

CONSTRUCTION STRUCTURE:

  • PROTAN BP MEMBRANE
  • PROTAN APPROVED FASTENERS
  • INSULATION
  • VAPOUR CONTROL LAYER
  • CONCRETE SUBSTRATE

PROTAN  BP MEMBRANE:

  • Protan BP is ca. 1.8 mm thick roofing membrane made of pliable PVC with a core of extra strong polyester reinforcement, which is used in Protan BlueProof Roofing System. 
  • Protan BP can be used as roofing on different kinds of substrate, but needs a separate glass migration barrier of the quality 120 g/m2 on polystyrene substrates. 
  • Protan BP has additional stabilizers to make the membrane resistant to high and low temperatures, ultra violet radiation and atmospheric contamination and to improve safety in case of fire. 
  • Welding of joints is carried out by using hot air. The roofing membranes have an embossed surface that provides an anti-slip texture.

 SYSTEM INSTALLATION METHOD:

  • Protan Standard Overlap System - The membrane is fastened to the substrate along the longitudinal sheet edges and overlapped by the adjoining roll. The two rolls are welded together using hot air.
  • Protan Prefabricated Sheets system is the best and fastest solution in wind-exposed areas, so it is ideal when the roof has to be covered quickly. The membrane is provided in 2 or 4 metre widths with high strength strips welded longitudinally on the underside for mechanical fastening.
  • The Protan Secret Fix System uses a membrane in 2-metre widths with extra strong strips welded transversely to the underside for mechanical fastening.

Please contact Protan for further advice.

FASTENERS:

  • Protan approved - must be calculated according to EN 1991-1-4 alongside national annexes and local regulations.

INSULATION:

Various types of insulation can be used in combination with Protan membranes and can be flat insulation or sloped insulation. The material type and design will depend on the building design, fire classification and local regulation requirements.

  • Mineral wool (MW) – can be glass or stone type
  • Polyisocyanurate (PIR) - foil faced
  • Combination EPS-MW

VAPOUR CONTROL LAYER:

  • Polyethylene
  • Bitumen

CONCRETE SUBSTRATE:

  • Structural concrete as either precast elements or reinforced cast in-situ.


Specifikim
  • TECHNICAL SPECIFICATION

    Protan BP specifications are subject to availability and may not be available or approved in all countries/regions.

    Membrane thickness:

    • ca.1.8 mm (2,1 kg/m2)

    Membrane standard widths: 

    • 1.0 m
    • 2.0 m

    Membrane standard roll lengths: 

    • Made to measure

    Membrane colours (nearest RAL code):

    • Dark grey F94 - RAL 7012 

    FIRE CLASSIFICATION

    Protan BP exposed roof systems are classified according to EN 13501-5. Fire classifications are available on a variety of constructions and insulation types. Please contact Protan for further information or refer to the relevant technical approvals.



Specifikime teknike
  • Referencë unikeblueproof_concrete_eu
  • Familja e produkteveRoofing
  • Grupi i produkteveSingle Ply Membrane
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2019-02-19
  • Numri i botimit1
Të ngjashme
  • Materiali kryesorPVC
  • Materiali dytësorInsulation
  • Projektuar nëNorvegji
  • Prodhuar nëNorvegji
Klasifikimi
  • Kategoria BIMobjectMateriale ndërtimi - Hidroizolues & Membrane
  • IFC classificationKulmet
  • Emrin UNSPSCRoofing membranes
  • UNSPSC code30151505
  • Uniclass 2015 CodeSs_30_40_30_80
  • Uniclass 2015 PërshkrimSingle layer sheet warm roof covering systems
  • CSI MasterFormat 2014 Code07 50 00
  • CSI MasterFormat 2014 TitleMembrane Roofing
  • OmniClass Number23-13 39 31 11 27
  • OmniClass TitlePolyvinyl chloride (PVC) Single Layer Roof Membranes
  • CSI UniFormat II CodeB3010
  • CSI UniFormat II TitleRoof Coverings
Karakteristikat
  • Building Materials - Waterproofing & Membranes
    ApplicationRoof
    Application Temperatures-30 °C - 50 °C
    Insulation Medium TypeMineral wool (Glass/Stone) | Expanded polystyrene (EPS) | Polyisocyanurate (PIR)
    MaterialPolyvinyl chloride (PVC) reinforced with knitted polyester|PVC
    Membrane TypeProtan BP
    Thickness1.8 mm
  • UK.COBie.Component
    Created Byprotan@protan.no
    DescriptionMechanically fixed synthetic (PVC) waterproofing system on concrete deck with insulation
    NamePolymeric Roofing Protan BP Membranes
  • UK.COBie.Type
    Asset TypeFixed
    Categoryn/a
    Code PerformanceEN 13956
    ColourDark grey F94 - RAL 7012
    ConstituentsVapour control layer, insulation, waterproofing membrane, mechanical fasteners
    Created Byprotan@protan.no
    DescriptionMechanically fixed synthetic (PVC) waterproofing system on concrete deck with insulation
    Duration UnitYears
    Expected Life30
    FeaturesAnti-slip texture, when prefabricated, secret-fix strips are factory-welded to the reverse side to minimise on-site welding
    FinishAnti-slip texture
    Graden/a
    Manufacturerprotan@protan.no
    MaterialPolyvinyl chloride (PVC) reinforced with knitted polyester|PVC
    Model Numbern/a
    Model ReferenceProtan BlueProof water attenuation system on concrete substrate
    NamePolymeric Roofing Protan BP Membranes
    Nominal Width1000 mm
    Sizen/a
    Sustainability PerformanceFully recyclable at the end of its working life, low carbon footprint
    Warranty DescriptionProtan Product Warranty - subject to local distributor
    Warranty Duration UnitYears

Rajoni i disponueshëm

Europe Asia
Åland Islands
Turqi
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë