HIPPO

HIPPO

Submersible centrifugal pumps for pumping sewage and effluents in buildings, domestic, commercial, industrial, and municipal facilities, where high flow rates with free passage of solid particles are required.

Specifikim
  • Product Specification

    Submersible centrifugal pump, spiral body, single stage, semi-open radial flow impeller, flanged discharge, bearing-mounted, shaft sealing through double mechanical seal.

    General Applications

    The HIPPO Series was developed to pump water with suspended solids in industrial, agricultural, water supply, and municipal sanitation applications.

    - Lift stations

    - Effluent treatment stations

    - Drainage of wastewater and rainwater

    Constructive Features

    - Flanged outlet according to ASME B 16.5 and DIN 2532 standards

    - Casing made of gray cast iron GG-25

    - Semi-open impeller made of nodular cast iron GGG-50

    - Bottom plate made of gray cast iron GG-25

    - Double mechanical seal in AISI-304 stainless steel, Buna N, Silicon carbide (SiC/SiC), and Graphite/Ceramic

    - Moisture sensor in the oil chamber

    - Thermal protection

    - IE3 IP-68 electric motor, 4 poles, 60Hz, class H insulation, AISI-420 stainless steel shaft

    - Lifting handle in 304 stainless steel

    - Cable length: 10 m

    - O-ring seals: Buna (NBR)


    Technical Specifications

    - Maximum liquid temperature: 40°C

    - Maximum submersion depth: 20 m

    - Installation in a wet well

    - Spherical solid passage of 65 mm for the HIPPO 4NH series and 76 mm for the HIPPO 6NF series


    Optional Features

    - Double mechanical seal in AISI-304 stainless steel, Buna N, Tungsten (Tung/Tung), and Graphite/Ceramic

    - Cable length: 25 m

    - Moisture sensor in the motor chamber

    - PT100 thermal sensor

    - Abrasion-resistant coating


    Important

    - Do not handle the pump with the motor powered: risk of electric shock

    - Not suitable for pumping potable water

    - For use outside the specified applications, consult the manufacturer

    - Refer to the Instruction Manual for additional operational precautions

Specifikime teknike
  • Referencë unikeMotobombas-Submersiveis-Non-Clog-hippo
  • Familja e produkteveSubmersíveis (Esgoto/Non-Clog)
  • Grupi i produkteveMotobombas Submersíveis
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2024-09-30
  • Numri i botimit1
Të ngjashme
  • Materiali kryesorCast iron
  • Projektuar nëBrazil
  • Prodhuar nëBrazil
Klasifikimi
  • Kategoria BIMobjectPajisje hidraulike - Pompë

Rajoni i disponueshëm

North America South America
Anguilla
Argjentinë
Antigua dhe Barbuda
Bolivi
Aruba
Brazil
Bahamas
Ekuador
Barbados
Guiana franceze
Belize
Guyana
Bermuda
Ishujt Falkland (Islas Malvinas)
Dominica
Kili
El Salvador
Kolumbi
Grenada
Paraguaj
Grenlandë
Peru
Guadeloupe
Suriname
Guatemala
Uruguay
Haiti
Venezuela
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika