i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung

    i250 Commercial Tankless System - Wall Hung

    Commercial Tankless on-demand water heater

    KEY FEATURES

    • Stainless (316L) Heat Exchanger
    • Flexible-Floating Design, stress-relieving and thermal shock resistant
    • Multi-Unit - Masterless cascading with common venting
    • Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
    • Designed and Built in the U.S.
    • 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

    PERFORMANCE

    • Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
    • Cascade up to 10 units with common venting for a total of
    over 2500MBH and a 83:1 total turndown ratio

    Specifikim
    • Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
      Fuel Preset for NG / LP Convertible
      Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
      Thermal Efficiency 92%
      Energy Factor N/A
      Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
      Weight (LBS) 93 LBS
      Water and Gas Connections 3/4" NPT
      Minimum Flow Rate 0.6 GPM

      Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
      Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
      Max 2” Vent Length - Single Pipe / Power Vent  (2” not allowed at elevations above 4,000 ft) N/A
      Max 2” Vent Length - Two Pipe / Direct Vent  (2” not allowed at elevations above 4,000 ft) N/A
      Installation Location Ambient Temperature 40°F – 130°F
      Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
      Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
      Flame Sensing
      Water Pressure Min / Max (PSI) 30 / 150

      NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”

      NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
      NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
      NG/LP - Maximum Static Gas Pressure 14”
      Gas Pressure for Adjustments 8” for NG, 11” for LP
      Electrical 120V AC, 60 Hz
      Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

    Specifikime teknike
    • Referencë unikei250
    • Familja e produktevei Series
    • Grupi i produkteveCommercial Tankless System - Wall Hung
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2020-05-11
    • Numri i botimit1
    Të ngjashme
    • Materiali kryesorÇelik
    • Projektuar nëShtetet e Bashkuara
    • Prodhuar nëShtetet e Bashkuara
    Klasifikimi
    • Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Ngrohës uji
    • IFC classificationShkëmbyesi i nxehtësisë
    • Kodi ETIMEC000392
    • Emri ETIMInstantaneous water heater
    • Emrin UNSPSCCommercial water heaters
    • UNSPSC code40101826
    • Uniclass 2015 CodePr_60_60_96
    • Uniclass 2015 PërshkrimWater heaters
    • CSI MasterFormat 2014 Code23 00 00
    • CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
    • OmniClass Number23-31 29 11
    • OmniClass TitleInstantaneous Hot Water Heaters
    • CSI UniFormat II CodeD3090
    • CSI UniFormat II TitleOther HVAC Systems & Equipment

    Rajoni i disponueshëm

    North America South America
    Anguilla
    Guyana
    Antigua dhe Barbuda
    Suriname
    Aruba
    Bahamas
    Barbados
    Belize
    Dominica
    Grenada
    Guadeloupe
    Haiti
    Ishujt e Virgjër Britanikë
    Ishujt e Virgjër të SHBA
    Ishujt Kajman
    Kanadë
    Karaibe Holandë
    Kolektiviteti i Shën Martinit
    Kubë
    Kuraçao
    Martinique
    Montserrat
    Porto Riko
    Republika Domenikane
    Saint-Barthélemy
    Shën Kitts dhe Nevis
    Shën Lucia
    Shën Vincent dhe Grenadinet
    Shtetet e Bashkuara
    Sint Maarten
    Trinidad dhe Tobago
    Turks dhe Caicos Islands
    Xhamaika