CaptiveAire

Sloped Wall Canopy Exhaust Hood with Perforated Supply Plenum, SND-2 Series

Name: Sloped Wall Canopy Exhaust Hood with Perforated Supply Plenum, SND-2 Series
Rating: 3.1 (14 reviews)

3.1(14 reviews)

SND-2 Series

CaptiveAires's Premier Sloped Canopy Hood
The SND-2 Series is a Type I, Sloped Wall Canopy Hood for use over 400°F and 600°F cooking surface temperatures. The Sloped Canopy is the ideal hood choice for low ceiling heights.

ADVANTAGES

Superior Exhaust Flow Rates
ETL Listed: ETL Listed for use over 400°F and 600°F cooking surface temperatures, which provides flexibility in designing kitchen ventilation systems. ETL Listed to US and Canadian safety standards, ETL Sanitation Listed and built in accordance with NFPA 96.
Capture and Containment: Insulated, double-wall rigid front has aerodynamic design that reduces radiant heat into kitchen, prevents condensation and provides exceptional capture and containment of cooking vapors. The signature "mechanical baffle" on the front of the hood's capture area is available on 18" Front Model only.
Convenient Design: Factory pre-wired lighting to illuminate the cooking surface is accessible from the bottom of the hood. Pre-punched hanging angles on each end of hood and additional set provided for hoods longer than 12'.
Construction: Polished stainless steel on the interior and exterior of the front enhance aesthetics. Fully welded and polished front corners. Fabricated from Type 430 stainless steel with option of Type 304 available. Sloped front for low ceiling applications.
Grease Extraction: All hoods come standard with stainless steel baffle filters and a deep grease trough which allows for easy cleaning. Grease drain system with removable 1/2 pint cup for easy cleaning.

PERFORMANCE
Avg. Cooking Surface Temperature (°F)ConfigurationMin. Exhaust CFM/ft400°F - Ovens, Steamers, Kettles, Open-Burner Ranges, Griddles, FryersSingle Wall Hood
2 Wall Hoods Back-to-Back228
456600°F - Gas Charbroilers, Electric Charbroilers Single Wall Hood
2 Wall Hoods Back-to-Back 294
588*Recommended Duct Sizing: Exhaust - Based on 1500 FPM

OPTIONS

Utility Cabinet Listed for integral side mount and fabricated of same material as hood. Cabinet can house listed fire suppression system and listed, pre-wired electrical controls.
Front Perforated Supply Plenum: Provides low velocity make-up air for the kitchen and is discharged in front of the hood. Perforated diffuser plates allow for even air distribution and supply riser includes a volume damper for easy balancing. Side Perforated Supply Plenums can be added to optimize the air flow if necessary.
Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.
End Panels: Should be used to maximize hood performance and eliminate the effects of cross drafts in kitchen. units constructed of stainless steel and sized according to hood width and cooking equipment. Exposed edges hemmed for safety and rigidity.
Separate Exhaust and/or Make-Up Air Fans ETL Listed single exhaust fans and supply-air fans and curbs available.
Fire Suppression System: UL 300 fire suppression system.
Lighting: Recessed Incandescent, Recessed Fluorescent, Compact Fluorescent, Recessed LED, Halogen
Optional Self Cleaning Technology: The system cleans grease from the plenum and portion of the duct with the daily hot water spray cycle.
Optional CORE Protection: The CORE Fire Protection System is an automatic, pre-engineered fire suppression system which is ETL listed to UL Standard 300. The CORE Protection System is designed to provide primary coverage for ventilating equipment including hoods, ducts, plenum and filters.

CERTIFICATIONS
The SND-2 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models SND-2 are ETL Listed under file number 3054804-001 and complies with UL710, ULC710 and ULC-S646 Standards.

Specifikime teknike

Referencë unikecaptiveaire-043
Familja e produkteveHVAC
Grupi i produkteveHood and Ventilation Equipment
LlojiObjekt (një objekt të vetëm)
Data e botimit2012-10-30
Numri i botimit1

Lidhje

Product URLhttp://www.captiveaire.com/catalogcontent/hoods/snd-2/index.asp?catid=305

Të ngjashme

Projektuar nëShtetet e Bashkuara
Prodhuar nëShtetet e Bashkuara

Klasifikimi

Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Ventilimi mekanik
Uniclass 2015 CodeSs_65_40_33_51
Uniclass 2015 PërshkrimMechanical supply ventilation systems
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-33 00 00
OmniClass TitleHVAC Specific Products and Equipment
CSI UniFormat II CodeD30
CSI UniFormat II TitleHVAC

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika