ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

Key Features

Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
For RH readings up to 100%
For absorbent concrete
No minimum profile required
No priming required prior to installation of ARDEX underlayments
Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
One-component system
Ready for use*, resealable and reusable
Easy to use and apply
Water-based, Zero VOC
ASTM E96 < .1 perms

*As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

Specifikim

Installation
Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)
Performance
Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install Underlayment: 1 – 24 hours
VOC: 0 g/L
Packaging: One 5 gal. (19 L) pail
Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

Specifikime teknike

Referencë unikeArdex-vb-100
Familja e produkteveMoisture Control System
Grupi i produkteveOne Component Moisture Control System
LlojiObjekt (një objekt të vetëm)
Data e botimit2024-02-21
Numri i botimit1

Lidhje

Product URLhttps://www.ardexamericas.com/product/ardex-vb-100/
Përshkrimet teknikehttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2022/12/ARDEX-VB-100-Technical-Data.pdf

Të ngjashme

Materiali kryesorPolymer-modified cementitious

Klasifikimi

Kategoria BIMobjectDysheme - Veshje & Mbulesa
IFC classificationKat
Emrin UNSPSCFlooring
UNSPSC code301617
Uniclass 2015 CodeEF_30_20
Uniclass 2015 PërshkrimFloors
CSI MasterFormat 2014 Code09 60 00
CSI MasterFormat 2014 TitleFlooring
OmniClass Number23-15 17 11
OmniClass TitleFlooring Specialties and Accessories
CSI UniFormat II CodeC3020
CSI UniFormat II TitleFloor Finishes

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika